Track Rental Video
Jul 25, 2010, 04:46 PM
#1
Former Sponsor
Thread Starter
iTrader: (21)
Join Date: Jun 2003
Location: Edison
Posts: 2,742
Likes: 0
Received 0 Likes
on
0 Posts
Track Rental Video
Track Rental Video
--------------------------------------------------------------------------------
We took 3 cars to a track rental Wed. The Orange car, Xceler8's Evo, and another customers Evo IX. We were told on tuesday afternoon that the rental was cancelled so we left the Orange car unfinished. Junior called me at 9pm Tuesday night to tell me that the rental was back on...so we went into the shop early to finish up the new setup on the car and get it down to the rental to make a few passes. We didn't get to put the car on the dyno, we just got it started and put it on the trailor. We made a few test passes but unfortunately we had issues with the cam sensor so we were unable to make any full passes. First pass was to check the AFR's so I shut it down as soon as I shifted 4th. Second pass we raised the boost a bit but when I shifted to 4th gear the cam sensor started to act up as you can hear in the video. We are VERY happy with the car as its running almost the same 1/8th mile as last year with 15 less pounds of boost. We changed the cams to Kelford 280's and the intake to a Magnus V5.
Xceler8's car ran real strong all day. He must have made over 10 passes....before he broke his rear diff. Best pass was a 10.40@138. His car is running an FPred, E85, and a stock ECU. Watch for that car to run even better ET's in the near future.
The other car we brought was a customers car. His name is Jose and I believe his screen name on here is ID#376. Evo IX that ran a best of 10.77@119 on pump gas with Junior letting off at the top of 4th gear. It also ran 10.8@131 and another low 11 second pass. We spent the day trying to dial in the lauch control. His mods are:
Turbotrix 2.0
Turbotrix Race head
Kelford 272
Full Race mAnifold with HTA86
Turbotrix COP
Turbotrix Fuel System
Buschur FMIC + UICP
Magnus V5 intake
Turbotrix Rebuilt 5 speed trans
Exedy triple disc
Sorry for the quick write up but I'm beat and need to go to bed.
Here is the vid:
Buschur FMIC + UICP
Magnus V5 intake
Turbotrix Rebuilt 5 speed trans
Exedy triple disc
Sorry for the quick write up but I'm beat and need to go to bed.
Here is the vid:
Thanks to Pat (Red4k) for the video.
http://vimeo.com/13564942
Keith
--------------------------------------------------------------------------------
We took 3 cars to a track rental Wed. The Orange car, Xceler8's Evo, and another customers Evo IX. We were told on tuesday afternoon that the rental was cancelled so we left the Orange car unfinished. Junior called me at 9pm Tuesday night to tell me that the rental was back on...so we went into the shop early to finish up the new setup on the car and get it down to the rental to make a few passes. We didn't get to put the car on the dyno, we just got it started and put it on the trailor. We made a few test passes but unfortunately we had issues with the cam sensor so we were unable to make any full passes. First pass was to check the AFR's so I shut it down as soon as I shifted 4th. Second pass we raised the boost a bit but when I shifted to 4th gear the cam sensor started to act up as you can hear in the video. We are VERY happy with the car as its running almost the same 1/8th mile as last year with 15 less pounds of boost. We changed the cams to Kelford 280's and the intake to a Magnus V5.
Xceler8's car ran real strong all day. He must have made over 10 passes....before he broke his rear diff. Best pass was a 10.40@138. His car is running an FPred, E85, and a stock ECU. Watch for that car to run even better ET's in the near future.
The other car we brought was a customers car. His name is Jose and I believe his screen name on here is ID#376. Evo IX that ran a best of 10.77@119 on pump gas with Junior letting off at the top of 4th gear. It also ran 10.8@131 and another low 11 second pass. We spent the day trying to dial in the lauch control. His mods are:
Turbotrix 2.0
Turbotrix Race head
Kelford 272
Full Race mAnifold with HTA86
Turbotrix COP
Turbotrix Fuel System
Buschur FMIC + UICP
Magnus V5 intake
Turbotrix Rebuilt 5 speed trans
Exedy triple disc
Sorry for the quick write up but I'm beat and need to go to bed.
Here is the vid:
Buschur FMIC + UICP
Magnus V5 intake
Turbotrix Rebuilt 5 speed trans
Exedy triple disc
Sorry for the quick write up but I'm beat and need to go to bed.
Here is the vid:
Thanks to Pat (Red4k) for the video.
http://vimeo.com/13564942
Keith
Last edited by TurbotrixRacing; Jul 26, 2010 at 07:40 AM.
Jul 25, 2010, 08:15 PM
#6
Former Sponsor
Thread Starter
iTrader: (21)
Join Date: Jun 2003
Location: Edison
Posts: 2,742
Likes: 0
Received 0 Likes
on
0 Posts
-Turbotrix Race Head w/Kelford 280 cams and Kiggly Restrictor
-Magnus Intake Manifold
-Turbotrix Custom FMIC
-Turbotrix 3" IC pipes
-AGP GT4202
-Turbotrix 321 divided header w/Tial 38mm wastegates
-Turbotrix 4" downpipe
-Tial BOV
-Magnus Fuel rail
-FIC 1600cc inj
-Custom Rad with Meziere water pump
-Custom Turbotrix wiring harness
-Turbotrix fuel system with Weldon Pump and Summit fuel cell
-AEM EMS
-Turbotrix COP with AEM CDI
-Exedy Triple disc
-Rota slipstreams with 15MT ET drags
-Stock 2G DSM brakes
-Stock front axles
-Original T-case with TTR LSD insert
-STOCK original Rear
-Stock Rear axle cups w/DSS bar upgrades
