I went to drag strip last week and was hot 95f i ran a best of 11.11 @ 131mph with bad 60ft of 1.9

http://www.youtube.com/watch?v=opcI_Bo8qjE


what do you think i can run with better 60ft?

 

how much power and torque you puttn down?

 

Nice job man! Info on setup?

 

last dyno was 500whp @ mainline dyno a really low reading dyno much lower than a MD torque was 460

 

Built 2.0 with gcs s2 cams ,gt35r .63 stock ecu stock maf stock intake and tb boost was 30ish psi street tires

 

the problem is getting the power down on street tires... But with a good 60 foot you'll break 10's without any problem.

 

131mph doesn't equal 500whp on a dyno that reads much lower than a mustang.

Nice run and shifting, next time get off that clutch way faster! I can tell traction sucks but if you burn through first and shift into second before the tires have a chance to hook up they will catch up sometime in second.

Car looks good!

 

what do you think DJ numbers should be ? at 131mph?

 

Guys what do you think DJ numbers should be for 3400lb car runs 131mph?

 

thats about 540ish to the crank, around 460ish md and some where around 500 on a dj just my guess at your et,mph and weight. nice run! need more practice

 

NICE VII.....Doing 11's

 

sweet what rear defuser is that? do you have any more pics?

 

Thanks guys the car is an JDM evo VII with evo 9 front&rear ends btw this run were done with 91+meth i just added 8 liters c16 to be in safe side ,self tuned 31psi i think its time to upgrade my turbo

 

Just like the others have said. A better 60' foot you will get into the 10's. Time for better tires.

 

I hope so my new exedy twin hd slipped when i did back to back runs any idea why it slips?!