Notices
DynoFlash [Visit Site]

Track Results Part 3

Thread Tools
 
Search this Thread
 
Old Jul 17, 2005 | 08:25 PM
  #1  
Randy's Avatar
Thread Starter
Evolved Member
iTrader: (14)
 
Joined: Jan 2005
Posts: 936
Likes: 0
From: Puerto Rico
Track Results Part 3

OK after last time that I went to the track with pump gas and then C16 today I went to race a street cars event at a local track here in Carolina PR.

Results were not as good as last time:

First pass:
Reaction: .632
60 ft. : 1.866
330ft. : 5.368
594ft. : 7.750
1/8mile : 8.277
1/8 mph: 85.42
1/4 :12.96
1/4 mph: 104.88

Second pass:
Reaction: .882
60 ft. : 1.818
330ft. :
594ft. :
1/8mile : 8.227
1/8 mph:
1/4 :12.93
1/4 mph: 105.36

Last pass:
Reaction: .741
60 ft. : 1.831
330ft. : 5.267
594ft. : 7.593
1/8mile : 8.113
1/8 mph: 86.67
1/4 :12.67
1/4 mph: 107.23

Exactly the same set up I went to the track last time I ran 12.50 @109 mph on pump gas.

Temperature:
HOT as hell

Humidity:
Humid as hell too

Al, read this, suggest me something and I will do it if I can. Let me know what I need so I can run constant low 12s on pump gas which is my goal.

Thanks
Randy
Reply
Old Jul 17, 2005 | 09:46 PM
  #2  
DynoFlash's Avatar
Account Disabled
iTrader: (91)
 
Joined: Sep 2003
Posts: 16,850
Likes: 0
From: 2003 Evo VIII - Silver
You need the race chip - that will solve your hot weather blues
Reply
Old Jul 18, 2005 | 05:02 AM
  #3  
Randy's Avatar
Thread Starter
Evolved Member
iTrader: (14)
 
Joined: Jan 2005
Posts: 936
Likes: 0
From: Puerto Rico
But the race chip can be used with pump gas? I thought it was only on race fuel.

Anyways I was thinking on a new intercooler as well.
Reply




All times are GMT -7. The time now is 05:50 AM.