Notices
DynoFlash [Visit Site]

Beta tester needed

Thread Tools
 
Search this Thread
 
Old Mar 8, 2004 | 09:27 PM
  #1  
DynoFlash's Avatar
Thread Starter
Account Disabled
iTrader: (91)
 
Joined: Sep 2003
Posts: 16,850
Likes: 0
From: 2003 Evo VIII - Silver
Beta tester needed

Anyone who is willing to drive over to Pruven Performance and has the following mods on his / her car

3" Exhuast - turbo back
Manual or Electric Boost controller
Buschur cone style intake
Walboro fuel pump (or willing to add a walboro fuel pump)

I need some beta testers to confirm car to car varaiance on my newly created Fireball 3 reflash which is going to be the next step up in my whp gains and smoothness

Your cost will be only $200 for the dyno time.

I will provode you with a full custom dyno flash at no extra charge and before and after dyno sheets

This is the same service we normally charge $550 for and is on sale at pruven only for $500 right now

NOTE - this offer ONLY applies to guys with the exact mods listed above - if your mods are different we will be happy to retune you at the normal prices

The reason why we do thi is becuase BEFORE we release a reflash we test it on a mimimum of 5 evos to verify safe margin of saftey. The tune is done we need some testers to finalize the testing and get this product out

Thanks

Last edited by DynoFlash; Mar 9, 2004 at 02:58 PM.
Reply
Old Mar 8, 2004 | 09:46 PM
  #2  
PcolaEvo's Avatar
Newbie
 
Joined: Mar 2004
Posts: 26
Likes: 0
From: Pensacola, FL
Al,

I am in D.C and gladly offer my car for testing. I do not have the parts yet but BEFORE YOU SAY NO, I can run up to MachV in the morning and put the order in and have pruven do the installation. It will be either HKS or buschur Turbo Back. I was going to do the March 20th dyno day but as luck would have it, I am out of town then. Pretty please?
Reply
Old Mar 8, 2004 | 09:54 PM
  #3  
DynoFlash's Avatar
Thread Starter
Account Disabled
iTrader: (91)
 
Joined: Sep 2003
Posts: 16,850
Likes: 0
From: 2003 Evo VIII - Silver
Originally posted by PcolaEvo
Al,

I am in D.C and gladly offer my car for testing. I do not have the parts yet but BEFORE YOU SAY NO, I can run up to MachV in the morning and put the order in and have pruven do the installation. It will be either HKS or buschur Turbo Back. I was going to do the March 20th dyno day but as luck would have it, I am out of town then. Pretty please?
No sweat man - just call me at 203-515-4110 and I will book you for a appointment to get it all done

The HKS will be less of a fee on installation and fit real good - the Buschur will make more power as it flow better. Kind of 6 or 1/2 dozen

I personally run the perrin which is my won personal favorite as the fit is dead on better than stock and the sound is great

The HKS stuff is hard to beat but IMHO I do not like how that one necks down to the stock cat size on the cat back part
Reply
Old Mar 8, 2004 | 10:16 PM
  #4  
PcolaEvo's Avatar
Newbie
 
Joined: Mar 2004
Posts: 26
Likes: 0
From: Pensacola, FL
... just pm'd you
Reply
Old Mar 8, 2004 | 10:23 PM
  #5  
Type-VIII's Avatar
Newbie
iTrader: (2)
 
Joined: Nov 2003
Posts: 76
Likes: 0
From: Wilmington, DE
I would be willing to make the trip, I just received Buschur turbo back/intake and I will buy a MBC and fuel pump. How soon were you looking to do this because I don't know how long it will take me to receive the last two products and have them installed?
Reply
Old Mar 9, 2004 | 10:32 AM
  #6  
EVOVIIIU's Avatar
Evolving Member
iTrader: (1)
 
Joined: Nov 2003
Posts: 199
Likes: 0
From: GEORGIA
All that I'm lacking is the pump... I'd be willing to make the trip for this!!!
Reply
Old Mar 9, 2004 | 10:45 AM
  #7  
DynoFlash's Avatar
Thread Starter
Account Disabled
iTrader: (91)
 
Joined: Sep 2003
Posts: 16,850
Likes: 0
From: 2003 Evo VIII - Silver
Originally posted by EVOVIIIU
All that I'm lacking is the pump... I'd be willing to make the trip for this!!!
Well get a pump and get over ! We need to gfet this done asap as we have a lot of guys on the waiting list for this particular flash and I won't release it til its done
Reply
Old Mar 9, 2004 | 10:51 AM
  #8  
camdog17's Avatar
Evolving Member
 
Joined: Jul 2003
Posts: 275
Likes: 0
From: Manassas, Va
I have everything, EXCEPT I have the K&N Typhoon Intake...would my Evo still qualify for the beta testing? If so, let me know; I'll cancel with Agile and make plans to drive up!
Reply
Old Mar 9, 2004 | 11:13 AM
  #9  
Dr_Ev0's Avatar
Newbie
 
Joined: Oct 2003
Posts: 55
Likes: 0
I need to make the installs also, but i really want to be a part of this. 1 more beta tester who needs to install parts, please
Reply
Old Mar 9, 2004 | 11:35 AM
  #10  
chinalfr's Avatar
Evolved Member
iTrader: (2)
 
Joined: Jul 2003
Posts: 521
Likes: 1
From: New England
Hey Al,

Can I be your beta tester again? I think I was the first batch of beta tester for dynoflash. I have HKS intake, DP, & Catback on my car. Walbro upgrade is coming up.

I willing to drive down to Pruven from Boston.
Reply
Old Mar 9, 2004 | 12:04 PM
  #11  
DynoFlash's Avatar
Thread Starter
Account Disabled
iTrader: (91)
 
Joined: Sep 2003
Posts: 16,850
Likes: 0
From: 2003 Evo VIII - Silver
Originally posted by chinalfr
Hey Al,

Can I be your beta tester again? I think I was the first batch of beta tester for dynoflash. I have HKS intake, DP, & Catback on my car. Walbro upgrade is coming up.

I willing to drive down to Pruven from Boston.
Read the posts above - I am looking for a specific type of mods

If you want a retune on your car we are offering a special now at pruven for $350 with the dyno time for a existing customer
Reply
Old Mar 9, 2004 | 12:04 PM
  #12  
SuperchargedGTZ's Avatar
Evolved Member
iTrader: (4)
 
Joined: Feb 2003
Posts: 946
Likes: 0
From: Gilbert, AZ
Al,

I was the one that you compared against the WORKS P2. I have exactly the mods that you listed except I was going to wait for the pump install when I upgraded my cams and injectors. But if you are offereing a deal, count me in.

i live 20 minutes from pruven.

I will send you a PM as well.

Ed
Reply
Old Mar 9, 2004 | 12:12 PM
  #13  
zupber4930's Avatar
Evolved Member
iTrader: (22)
 
Joined: May 2003
Posts: 994
Likes: 0
AL, I'm in, but I'm in Illinois and was planning on coming to the AMS party on Friday....how would you be able to work that since all of Friday is filled?

I have the AMS K&N Cone filter, a MBC, and the AMS 3" TB Exhaust, I want the fuel pump but I am currently waiting for Nino to get back to me on something else I wanted so I can order just once from him.

Please let me know if this is still available
Thanks
Reply
Old Mar 9, 2004 | 12:20 PM
  #14  
chinalfr's Avatar
Evolved Member
iTrader: (2)
 
Joined: Jul 2003
Posts: 521
Likes: 1
From: New England
Thanks, Al.

I will see you soon. Hope to get cam & walbro installed before I head back down to Pruven.

Originally posted by DynoFlash
Read the posts above - I am looking for a specific type of mods

If you want a retune on your car we are offering a special now at pruven for $350 with the dyno time for a existing customer
Reply
Old Mar 9, 2004 | 02:57 PM
  #15  
DynoFlash's Avatar
Thread Starter
Account Disabled
iTrader: (91)
 
Joined: Sep 2003
Posts: 16,850
Likes: 0
From: 2003 Evo VIII - Silver
Originally posted by SuperchargedGTZ
Al,

I was the one that you compared against the WORKS P2. I have exactly the mods that you listed except I was going to wait for the pump install when I upgraded my cams and injectors. But if you are offereing a deal, count me in.

i live 20 minutes from pruven.

I will send you a PM as well.

Ed
Perfect

GUYS - PLEASE - you have to have the exact mods listed above
and be willing to drive t my dyno shop - Pruven Performance
Reply



All times are GMT -7. The time now is 08:11 AM.