I am going to reflash my car soon but before I do that, I would like to know what else I should install. My current mods as follows:

1. HKS EVC V
2. Borla 3" exhaust
3. Perrin downpipe coated by JetHot
4. Perrin cat delete pipe
5. HKS Racing Suction Intake

I want to upgrade my BOV to the EVO MR. I also heard its nice to upgrade your fuel pump too. Just to put it out there, I am to do HKS Cams 264 but next year.

What would you suggest? What kind of results would I be looking regarding the HP to the wheels?

 

I think you just need the walbro pump along with my flash for the HKS RK kit - - it is with out a doubt the best flash I have - very good even through the mail !

ABout 300 whp and ft lbs

 

If the stock BOV is not leaking boost just stick with it! You could upgrade your fuel pump just to stay on the safe side, but you should be fine even with the stock pump! Look at it like this buschur doesn't upgrade the fp until until stage 4, and stage 1-3 includes the tb exhaust, mbc, fmic, and cams! I am getting a reflash in 2 weeks with similar mods except no intake but i'm installing cams! I'm upgrading the fp to play it safe! Hope this helps!

 

Walbro
FMIC
Hard Pipes

I think that'll yield 330 or so wheel hp after the dynoflash and cams

 

Make sure fuel pump is properly installed

 

I was also thinking of getting the Perrin Oil Catch Can, Do they help?
As for power, should I get the Helix Stainless 02 Housing Turbo Outlet?(They say it can give you somewhere between 6-14HP)
Al, what do you think of the Greddy Type-S BOV?

 

I just got my Helix 02 housing in the mail today. I also picked up a Helix DP and cat delete pipe. Top notch stuff. Deal with Calvin...he's the man.

Back to the 02 housing. I installed the DP and CDP today, but I took a pass on the 02 Housing. It looks like it is going to be a ***** to install!

Good luck.

Al, I am going to have you tune my car (TTM for now). Which mods for your best flash that you mentioned above?

Thanks,

Andy