thank god!!!

 

whoa nice, who has a cable here in socal that i can borrow?

 

so this does not work for the 03 LANCER 5spd? cause my buddy just bought the cable for somthing like this and it would nice to use...

 

colby, i have u received my email that i sent a couple of weeks ago.
i sent you an email about my ecu with identifier number 96420007 and attached my current rpm.
i would have to choose the 96420008 identifier for it to display my rom, but the rpm scaling in the idle stepper look-up table are off.

 

GO BUY THE DUMB THING You spent the cash for a IX, you should have plaenty of budget. But seriously, there should be plenty of cables in stock, mine just arrived today

 

 

Thank you. I watch Jay work every day hard to make this software work for the community. It is given to you for free. And you cant spend the $100 to buy a cable for yourself. Even I bought one and we have them laying everywhere around the shop. Help support this. We aren't asking for licensing fees or your life just put in your effort to keep this thing going. Do your part.

 

will it work on a 03 Lancer 5sp....???

 

damn colby, very nice.

 

Yes, it works. Has been since version 1.26. But sometimes the Lancer ECU's can be stubborn to readout at times. But eventully it will read out after a couple of times trying.

Also everyone, don't send Colby ROMS to get definitions, send them to me. That's my job. Just a reminder, I have about 34 ROMs more ROMs already that I have to make definitions for. So you guys will have to bare with me.

Thanks

 

Assuming that you installed ECUFlash using the default config, do the following steps (only modify the custom ROM files that you or other made, the default EcuFlash ROM files should be already updated upon you installed it):

Open Windows Explorer, browse to the directory "c:\Program Files\OpenECU\EcuFlash\RomMetadata\Mitsubishi\Evo" , open the .XML files in there with your favorate text editor (NotePad should be ok), look at line #6 which contains the following "<flashmethod>evo</flashmethod>" and replace the "evo" with "mitsukernel", save & close the file and continue modifying other files if neccessary. Done.

 

yea my files all say mitsukernel so I guees Im good thanks for clearing that up for me

 

1.28 rocks Just reflashed my JDM Evo 9 GSR ECU (JM885708) quickly and easily. Changed the fuel, timing, VVT, boost limit and reduced the lean spool RPM from 3500 to 2500 RPM. I flattened the fuel map so that it is richer in the midrange and leaner at the top (it was >>12:1 mid, 10:1 at the top - I want 12:1 mid, 11.0-11.5:1 at the top, or whatever it seems to like). I took a degree of timing out at 6000 and 6500 RPM from load 200 upwards on all four high octane ignition maps. I advanced the VVT to 24 degrees in the spool areas. Verified the checksums all OK and the car starts.

I will test it this afternoon with the wideband and knock monitoring and see if it has got rid of my lean spool up, lift off det and det at 6500 RPM problems running the AVC-R with the stock ECU at high boost.

Thanks Colby!

 

This is great news.. I can now start doing some more serious tuning locally.. Just waiting on evo4mad's logger..

 

I have a 2003 Lancer OZ 5-speed and none of the definitions work with my ECU. There is a definition for a 2002 or a 2004 Lancer. I sent my identifier and a saved ROM (using a wrong definition) to Colby who then passed it on to someone else. I downloaded and installed ver. 1.28 yesterday and still nothing works with my ECU....