Speed density on stock ECU dyno results
Thread Starter
Account Disabled
iTrader: (1)
Joined: Jun 2006
Posts: 472
Likes: 0
From: Taftville, CT
Speed density on stock ECU dyno results
I spent some time on the dyno today to dial in and verify the WOT portion of my map. I still have a lot of work to do on idle, low load cruise and throttle tip in. The only knock I am getting is 3500 where it spikes lean for a second. Peak numbers are 426whp/445wtq. Weather conditions are written on the graph.
Here's the log:
Here's the dyno graph:
Here's the log:
Here's the dyno graph:
Kinda hard to get your scaling right, but you're running ~7deg timing, 27-29psi boost, and mid to upper 12's AFR and making 450ish AWT at peak torque on the stock turbo? I notice you have a WI/meth kit... are you running 100% meth? Or is this race gas? Congrats on getting it ironed out either way.
Thread Starter
Account Disabled
iTrader: (1)
Joined: Jun 2006
Posts: 472
Likes: 0
From: Taftville, CT
Kinda hard to get your scaling right, but you're running ~7deg timing, 27-29psi boost, and mid to upper 12's AFR and making 450ish AWT at peak torque on the stock turbo? I notice you have a WI/meth kit... are you running 100% meth? Or is this race gas? Congrats on getting it ironed out either way.
I'm running 50/50 water/meth with 93 oct.
Everything else is as you described.
