Is there a way to disable the immobilizer in the XML file? im not good with the periphery bits; so i dont want to mess with them. but i have worked in the xml file before. thanks

 

Is easy buddy just check this:

http://evoecu.logic.net/wiki/Periphery_Configuration

 

Thanks i will give it a try, anyone else disable it another way?

 

just load your rom up and scroll down to periphery0 (FAA) Bits

and open it then set bit3 to 0 to enable the immobilizer disabling. (4th one up from the last)

by default it will be set to 1 of course. (immobilizer enabled)

 

after loading the periphery Bits i have some other options to disable, i disabled my immobilizer so i have to check if that worked; but can i disable the EGR and Evap stuff from there. if so do i have to make changes to my tune?
Also thanks for all the help already.

 

yes you can disable it.

 

I have a question, I've followed that link for the directions to add the periphery bits, but it won't let me save it on the evo7base. Is says that the file directory doesn't match. Am I missing something? I have tried the FFFF or 0xffff to disable it, but the g still won't start, now I can plug the stock ecu in, and it fires up fine. I even metered the conversion harness to make sure everything was connected, and it is. This is what I do, I open this up with note pad, C:\Program Files\OpenECU\EcuFlash\rommetadata\mitsubishi\evo\ evo7base.xml
copy and pasted the tables for the periphery bits into there but it will not save it at all, I have even went through all of r3compile's videos... please help this is the only thing thats keeping me from starting and tuning the evo 8 ecu in my g Thanks in advance

 

send me your e mail address il send you a 7 base

 

Thanks man wileyman45@hotmail.com

 

anybody else have any ideas on what I need to do? any help would be greatly appreciated

 

If you disable the imobilizer can you just get a new key cut and not have to program it?

 

I believe so. That's what the immobilizer stops. I know in Australia I need to have an aftermarket immobilizer that cuts power to everything else so that I can get insurance for it, so disabling the factory immobilizer wasn't a huge problem for me.

 

that would be nice nearest dealer is like 3hrs

 

Sent

 

^thanks again! now I can see the table in ecu flash, now I just gotta figure out how to disable immob. lol