Please check my log
#1
Evolving Member
Thread Starter
Please check my log
Hello. Can anybody say something about this log? This is 2nd, 3rd and 4th gear fast run.
I'm having a feeling that something is wrong with my wastegate, cause my GT30R seems to be a little laggy now.
I had a little wg v-band issue, but I had hope I fixed it:
I am using Grimmspeed 3-port with top and side port in wastegate connected like here:
Is my log ok or it is not? I am wondering of that 6 points of knock, that they doesn't exists at the dyno.
Here my logfile:
http://wrzucacz.pl/file/782130765170...9_21.41.07.csv
Sorry if something is not understood - my english is not too good ;/
I'm having a feeling that something is wrong with my wastegate, cause my GT30R seems to be a little laggy now.
I had a little wg v-band issue, but I had hope I fixed it:
I am using Grimmspeed 3-port with top and side port in wastegate connected like here:
Is my log ok or it is not? I am wondering of that 6 points of knock, that they doesn't exists at the dyno.
Here my logfile:
http://wrzucacz.pl/file/782130765170...9_21.41.07.csv
Sorry if something is not understood - my english is not too good ;/
Last edited by TJung; Jun 9, 2011 at 09:28 PM.
#2
Evolving Member
Thread Starter
Anyone? Also, I can't force my turbo to make 1,6 bar (that was set in rom) in low gears (1,2,3rd). Only from 4th gear (and up) I see my desired boost. Earlier I didn't have this problem.
Maybe it's still this wg :/
EDIT:
and one more thing. My stationary rev limit boost was earlier ~0,5 bar. Now it's ~0,3 bar. I think I'll go crazy
Maybe it's still this wg :/
EDIT:
and one more thing. My stationary rev limit boost was earlier ~0,5 bar. Now it's ~0,3 bar. I think I'll go crazy
Last edited by TJung; Jun 10, 2011 at 08:14 AM.