Idle Stepper Lookup Table help
The original definition for that table is wrong. Add this to your definition file and it will appear properly. The left axis is supposed to be ISCV Demand.
Source: https://www.evolutionm.net/forums/ec...sassembly.html
<table name="Idle Stepper Lookup Table" category="ISCV Control" type="3D" address="3e31" scaling="ISCVSteps">
<table name="Coolant Temp" type="X Axis" elements="8" address="7164" scaling="Temp"/>
<table name="ISCV Demand" type="Y Axis" elements="27" address="717e" scaling="ISCV_AX2_16"/>
</table>
<table name="Coolant Temp" type="X Axis" elements="8" address="7164" scaling="Temp"/>
<table name="ISCV Demand" type="Y Axis" elements="27" address="717e" scaling="ISCV_AX2_16"/>
</table>
The original definition for that table is wrong. Add this to your definition file and it will appear properly. The left axis is supposed to be ISCV Demand.
Source: https://www.evolutionm.net/forums/ec...sassembly.html
Source: https://www.evolutionm.net/forums/ec...sassembly.html
Thread
Thread Starter
Forum
Replies
Last Post
