Hi all,

I'm a newb here tring to figure out next step.
I'm using 96531706, Omni 4 Bar, FT for instead of IAT
I adjusted RPM VE to dial in stft and ltft(mid).

Map VE still set 1:1.
13.4376 13.4376
25.6536 25.6536
37.8696 37.8696
50.0856 50.0856
74.5176 74.5176
116.052 116.052
145.37 145.37
415.344 415.344


@ this point I'm guessing I'm ready to throttle up.
My ? is what should I be logging (AFR,Load,etc.)
and what should I be looking for in logs to determine adjustments to Map VE?

thanks