Fuel trims at wot

Reply Subscribe

Thread Tools

Search this Thread

Sep 17, 2013 | 11:30 AM

nicolassabra

Thread Starter

Newbie

Joined: May 2013

Posts: 22

Likes: 0

From: lebanon

Fuel trims at wot

hello

i want to ask why my O2 Feedback Trim and my FuelTrim InUse are 0 at wot ,and the other fuel trims are stuck on the same values

Attached Files

run at wot.zip (3.7 KB, 0 views)

Sep 17, 2013 | 12:32 PM

90zcrex

Evolving Member

iTrader: (11)

Joined: Feb 2012

Posts: 275

Likes: 2

From: Columbia, SC

It is normal for trims to go to 0 when under WOT. Ecu only uses trims under a certain load, once you hit over that load it uses fuel maps.

Sep 17, 2013 | 02:36 PM

Raptord

Evolved Member

iTrader: (10)

Joined: Mar 2009

Posts: 3,525

Likes: 20

From: Gatineau, Quebec, Canada

Fuel trims are used for closed loop only, which is used in idle/cruising. Under boost the car is in open loop, and the fuel maps are used.

Sep 18, 2013 | 07:59 PM

domyz

Evolved Member

iTrader: (6)

Joined: Jun 2010

Posts: 878

Likes: 7

From: Canada

Quote:

Originally Posted by Raptord

Fuel trims are used for closed loop only, which is used in idle/cruising. Under boost the car is in open loop, and the fuel maps are used.

That's what Jay@Boosted tuning told me also. But I found where I've been misleaded when I thought it the opposite way:
Read from post 95 and below... https://www.evolutionm.net/forums/ec...options-7.html

Did you tested it under 1600hz? I never had/took time to test it.