Playing with the SH-2 On-Chip Debugger (AUD)
Newbie
Joined: Jun 2014
Posts: 96
Likes: 44
From: Russia
In addition to mut and obd logging, almost all firmware (H8, SH7052, SH7055, m32r) contain built-in dma logging mode. More than 8 modes.
Some of them are 100 hz (24 variables of 2 bytes each), 200 hz (24 variables of 1 byte each) and 800 hz (5 variables of 2 bytes each).
Logging is available both from the mut table (mt + at) and any request from RAM memory.
Some of them are 100 hz (24 variables of 2 bytes each), 200 hz (24 variables of 1 byte each) and 800 hz (5 variables of 2 bytes each).
Logging is available both from the mut table (mt + at) and any request from RAM memory.
Thread Starter
EvoM Community Team Leader
Joined: Aug 2005
Posts: 5,690
Likes: 708
From: West Coast
In addition to mut and obd logging, almost all firmware (H8, SH7052, SH7055, m32r) contain built-in dma logging mode. More than 8 modes.
Some of them are 100 hz (24 variables of 2 bytes each), 200 hz (24 variables of 1 byte each) and 800 hz (5 variables of 2 bytes each).
Logging is available both from the mut table (mt + at) and any request from RAM memory.
Some of them are 100 hz (24 variables of 2 bytes each), 200 hz (24 variables of 1 byte each) and 800 hz (5 variables of 2 bytes each).
Logging is available both from the mut table (mt + at) and any request from RAM memory.