Questions on new and old software
Oct 15, 2006, 08:45 AM
#1
Newbie
Thread Starter
Join Date: Aug 2006
Location: Florida
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Questions on new and old software
Well after downloading the latest version my first question has been answered. I couldn't see the value for the injectors scaling. Now it isn't a problem.
Second question, the Idle stepper look up table looks like this in the rpm column..
160.156
255996
136422
255996
140883
19.5312
250
312.5
375
437.5
500
255996
136430
255996
136398
15.625
132.812
195.312
257.812
320.312
255996
136422
255996
137883
82.0312
750
1000
A bit strange. Any thoughts. Also has anyone figured out the TAR units. What do they represent as figure of measurement or reference.
Second question, the Idle stepper look up table looks like this in the rpm column..
160.156
255996
136422
255996
140883
19.5312
250
312.5
375
437.5
500
255996
136430
255996
136398
15.625
132.812
195.312
257.812
320.312
255996
136422
255996
137883
82.0312
750
1000
A bit strange. Any thoughts. Also has anyone figured out the TAR units. What do they represent as figure of measurement or reference.
Oct 16, 2006, 04:59 AM
#4
Originally Posted by Dominos
Since when does the RPM column look like that?
And if you have correctly searched for your answer as you have probably done after the first response, you would have allready found this information without submitting a redundant repost
Good luck
Last edited by C6C6CH3vo; Oct 16, 2006 at 05:01 AM.