Notices
ECU Flash

MDP Connector?

Thread Tools
 
Search this Thread
 
Old Dec 22, 2008 | 11:22 AM
  #1  
RoadSpike's Avatar
Thread Starter
Evolved Member
iTrader: (5)
 
Joined: Oct 2006
Posts: 3,805
Likes: 2
From: Sacramento, CA
MDP Connector?

Just a shout out here.

I got a 5 bar map sensor coming in from zeitronix and what i want to do is make an adapter going from the original clip to the zeitronix map. I got the harness for the zeitronix map sensor now i just need to find out where i can purchase the connector to plug into the original.

Any leads or part numbers i can use to look this thing up? I couldn't find markings on the connector itself that were useful.
Reply
Old Dec 23, 2008 | 02:12 PM
  #2  
Zeitronix's Avatar
Evolving Member
iTrader: (2)
 
Joined: Nov 2005
Posts: 327
Likes: 0
Zeitronix makes the Z-chip, which got stock EVO MAP connectors. Perhaps "they" have some extra pieces?
Reply
Old Dec 23, 2008 | 02:38 PM
  #3  
RoadSpike's Avatar
Thread Starter
Evolved Member
iTrader: (5)
 
Joined: Oct 2006
Posts: 3,805
Likes: 2
From: Sacramento, CA
Originally Posted by Zeitronix
Zeitronix makes the Z-chip, which got stock EVO MAP connectors. Perhaps "they" have some extra pieces?
Excellent idea I'll contact them and see if i can at least get a part number or quote.
Reply
Old Dec 23, 2008 | 03:05 PM
  #4  
Deepnine's Avatar
Evolving Member
iTrader: (4)
 
Joined: Apr 2008
Posts: 186
Likes: 0
From: Germany
do you have an image of the connector you are seaching?

Are you looking for cable side, or the mpd sensor side with cables on it?
Reply
Old Dec 23, 2008 | 04:11 PM
  #5  
RoadSpike's Avatar
Thread Starter
Evolved Member
iTrader: (5)
 
Joined: Oct 2006
Posts: 3,805
Likes: 2
From: Sacramento, CA
Originally Posted by Deepnine
do you have an image of the connector you are seaching?

Are you looking for cable side, or the mpd sensor side with cables on it?
Its an AMP style connector with 3 wires. I'm looking for the male side so like the mdp sensor. I want to basically plug it in so i'm not splicing up my wires.

on left:
Reply
Old Dec 23, 2008 | 04:37 PM
  #6  
Deepnine's Avatar
Evolving Member
iTrader: (4)
 
Joined: Apr 2008
Posts: 186
Likes: 0
From: Germany
I have an audi 100, there are lots of connectors (wire to wire) likes this in the engine bay, i will take a look tomorrow.
Reply
Old Dec 23, 2008 | 05:10 PM
  #7  
Deepnine's Avatar
Evolving Member
iTrader: (4)
 
Joined: Apr 2008
Posts: 186
Likes: 0
From: Germany
I have found one witch looks like it.

I will test the next day and try to get a part number.
Attached Images  
Reply
Old Dec 23, 2008 | 05:44 PM
  #8  
RoadSpike's Avatar
Thread Starter
Evolved Member
iTrader: (5)
 
Joined: Oct 2006
Posts: 3,805
Likes: 2
From: Sacramento, CA
Excellent thank you
Reply
Old Dec 24, 2008 | 05:33 PM
  #9  
RoadSpike's Avatar
Thread Starter
Evolved Member
iTrader: (5)
 
Joined: Oct 2006
Posts: 3,805
Likes: 2
From: Sacramento, CA
Zeitronix wants 29 bucks for the connector...

11 bucks sure 29 never.. I guess i'll hunt for that audi connector.


Edit:

Think i may have found the part number 1254487003 for the bosch male 3 pin connector.

Its not cheap around 23 bucks.

Last edited by RoadSpike; Dec 24, 2008 at 06:02 PM.
Reply
Old Dec 24, 2008 | 06:27 PM
  #10  
Zeitronix's Avatar
Evolving Member
iTrader: (2)
 
Joined: Nov 2005
Posts: 327
Likes: 0
Correction, for 2 connectors crimped together. 5 BAR round female to 3 pin flat male. Plug and play.
Or just find a male piece and make your own.
Reply
Old Dec 24, 2008 | 06:37 PM
  #11  
Deepnine's Avatar
Evolving Member
iTrader: (4)
 
Joined: Apr 2008
Posts: 186
Likes: 0
From: Germany
29 usd, thats cheap.

i had to buy some more connector because soem stupid animal thought the funny colored connectors taste good. At the end I was paying, 500 usd only for 12 connector from Audi.

Take the connector from zeitronix, save yout time.
When you look at Molex or another connector manufacturer they are not cheap if you buy under 10,000pc.

The audi connector isn't sold seperatly. the green one, is from a knocksensor. maybe you find one at a junkyard.

ebay Item number: 260048009939 20 usd +10 usd shipping

Last edited by Deepnine; Dec 24, 2008 at 06:40 PM.
Reply
Old Dec 24, 2008 | 11:15 PM
  #12  
RoadSpike's Avatar
Thread Starter
Evolved Member
iTrader: (5)
 
Joined: Oct 2006
Posts: 3,805
Likes: 2
From: Sacramento, CA
Originally Posted by Deepnine
29 usd, thats cheap.

i had to buy some more connector because soem stupid animal thought the funny colored connectors taste good. At the end I was paying, 500 usd only for 12 connector from Audi.

Take the connector from zeitronix, save yout time.
When you look at Molex or another connector manufacturer they are not cheap if you buy under 10,000pc.

The audi connector isn't sold seperatly. the green one, is from a knocksensor. maybe you find one at a junkyard.

ebay Item number: 260048009939 20 usd +10 usd shipping
Its definitely not cheap but surely convienent

I think i'll just take zeitronix offer on the connector and save myself time.
Reply
Old Dec 29, 2008 | 03:27 PM
  #13  
Zeitronix's Avatar
Evolving Member
iTrader: (2)
 
Joined: Nov 2005
Posts: 327
Likes: 0
Plug and Play. You will receive it shortly.
Attached Thumbnails MDP Connector?-zeitmap_to_mitsu_map.jpg   MDP Connector?-zeitmap_to_mitsu_map_back.jpg  
Reply
Old Jan 5, 2009 | 09:38 AM
  #14  
RoadSpike's Avatar
Thread Starter
Evolved Member
iTrader: (5)
 
Joined: Oct 2006
Posts: 3,805
Likes: 2
From: Sacramento, CA
Originally Posted by Zeitronix
Plug and Play. You will receive it shortly.
I hope thats in the right order for my evo 8

Still waiting on this bad boy.

Edit:
Actually recieved it today

Last edited by RoadSpike; Jan 5, 2009 at 11:08 PM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
CO_VR4
For Sale - Interior / Exterior / Sound / Styling
4
Oct 25, 2016 05:30 PM
evillancer06
Evo Dyno Tuning / Results
2
Jan 10, 2016 02:56 PM
Blak94GSX
Evo X How Tos / Installations
21
Feb 4, 2015 03:02 PM
Skylineracer
ECU Flash
16
May 31, 2014 08:04 PM
TTP Engineering
EvoX 'For Sale' Interior Styling
18
Dec 1, 2009 12:45 PM




All times are GMT -7. The time now is 02:52 AM.