MDP Connector?

Subscribe
Dec 22, 2008 | 11:22 AM
  #1  
Just a shout out here.

I got a 5 bar map sensor coming in from zeitronix and what i want to do is make an adapter going from the original clip to the zeitronix map. I got the harness for the zeitronix map sensor now i just need to find out where i can purchase the connector to plug into the original.

Any leads or part numbers i can use to look this thing up? I couldn't find markings on the connector itself that were useful.
Reply 0
Dec 23, 2008 | 02:12 PM
  #2  
Zeitronix makes the Z-chip, which got stock EVO MAP connectors. Perhaps "they" have some extra pieces?
Reply 0
Dec 23, 2008 | 02:38 PM
  #3  
Quote: Zeitronix makes the Z-chip, which got stock EVO MAP connectors. Perhaps "they" have some extra pieces?
Excellent idea I'll contact them and see if i can at least get a part number or quote.
Reply 0
Dec 23, 2008 | 03:05 PM
  #4  
do you have an image of the connector you are seaching?

Are you looking for cable side, or the mpd sensor side with cables on it?
Reply 0
Dec 23, 2008 | 04:11 PM
  #5  
Quote: do you have an image of the connector you are seaching?

Are you looking for cable side, or the mpd sensor side with cables on it?
Its an AMP style connector with 3 wires. I'm looking for the male side so like the mdp sensor. I want to basically plug it in so i'm not splicing up my wires.

on left:
Reply 0
Dec 23, 2008 | 04:37 PM
  #6  
I have an audi 100, there are lots of connectors (wire to wire) likes this in the engine bay, i will take a look tomorrow.
Reply 0
Dec 23, 2008 | 05:10 PM
  #7  
I have found one witch looks like it.

I will test the next day and try to get a part number.

 

Reply 0
Dec 23, 2008 | 05:44 PM
  #8  
Excellent thank you
Reply 0
Dec 24, 2008 | 05:33 PM
  #9  
Zeitronix wants 29 bucks for the connector...

11 bucks sure 29 never.. I guess i'll hunt for that audi connector.


Edit:

Think i may have found the part number 1254487003 for the bosch male 3 pin connector.

Its not cheap around 23 bucks.
Reply 0
Dec 24, 2008 | 06:27 PM
  #10  
Correction, for 2 connectors crimped together. 5 BAR round female to 3 pin flat male. Plug and play.
Or just find a male piece and make your own.
Reply 0
Dec 24, 2008 | 06:37 PM
  #11  
29 usd, thats cheap.

i had to buy some more connector because soem stupid animal thought the funny colored connectors taste good. At the end I was paying, 500 usd only for 12 connector from Audi.

Take the connector from zeitronix, save yout time.
When you look at Molex or another connector manufacturer they are not cheap if you buy under 10,000pc.

The audi connector isn't sold seperatly. the green one, is from a knocksensor. maybe you find one at a junkyard.

ebay Item number: 260048009939 20 usd +10 usd shipping
Reply 0
Dec 24, 2008 | 11:15 PM
  #12  
Quote: 29 usd, thats cheap.

i had to buy some more connector because soem stupid animal thought the funny colored connectors taste good. At the end I was paying, 500 usd only for 12 connector from Audi.

Take the connector from zeitronix, save yout time.
When you look at Molex or another connector manufacturer they are not cheap if you buy under 10,000pc.

The audi connector isn't sold seperatly. the green one, is from a knocksensor. maybe you find one at a junkyard.

ebay Item number: 260048009939 20 usd +10 usd shipping
Its definitely not cheap but surely convienent

I think i'll just take zeitronix offer on the connector and save myself time.
Reply 0
Dec 29, 2008 | 03:27 PM
  #13  
Plug and Play. You will receive it shortly.

MDP Connector?-zeitmap_to_mitsu_map.jpg   MDP Connector?-zeitmap_to_mitsu_map_back.jpg  

Reply 0
Jan 5, 2009 | 09:38 AM
  #14  
Quote: Plug and Play. You will receive it shortly.
I hope thats in the right order for my evo 8

Still waiting on this bad boy.

Edit:
Actually recieved it today
Reply 0
Subscribe