5LEEPERISAH23I

iTrader: (23)

so i have n evo n my bro also has an evo... year 2003 evo and a year 2004 evo

mine was protuned my bro's was never,

EVOSCAN WORKS THO!!!

1. i tried both cars neither read the ecu..
it said, "error cant read ecu.. see log files or something'

1. what i did.. plugged in tratix 2.0
2. turned on computer
3. plugged it in the usb
4. turned the ingintion ON
5. hit read ECU

said error for both cars

this is what it says on ecuflash:
[20:25:25.926] EcuFlash Version 1.42.2595
[20:25:25.926] OS Version Windows XP
[20:25:25.926] Qt Version 4.5.0
[20:25:26.006] 56 memory models read.
[20:25:26.006] scanning for metadata models in C:/Program Files/OpenECU/EcuFlash/rommetadata
[20:25:27.037] 343 ROM metadata models scanned.
[20:25:27.037] checksum module "subarudbw" loaded.
[20:25:27.037] checksum module "mitsucan" loaded.
[20:25:27.037] flashing tool "wrx02" loaded.
[20:25:27.037] flashing tool "wrx04" loaded.
[20:25:27.037] flashing tool "sti04" loaded.
[20:25:27.037] flashing tool "sti05" loaded.
[20:25:27.037] flashing tool "mitsukernel" loaded.
[20:25:27.037] flashing tool "mitsukernelocp" loaded.
[20:25:27.037] flashing tool "mitsubootloader" loaded.
[20:25:27.037] flashing tool "shbootmode" loaded.
[20:25:27.088] flashing tool "shaudmode" loaded.
[20:25:27.088] flashing tool "subarucan" loaded.
[20:25:27.088] flashing tool "mitsucan" loaded.
[20:25:56.540] J2534 API Version: 04.04
[20:25:56.540] J2534 DLL Version: 0.50.2598 Jun 26 2009 15:02:29
[20:25:56.540] Device Firmware Version: 1.10.3020
[20:26:05.703] sending init sequence 1 (0001)
[20:26:08.948] sending init sequence 1 (0003)
[20:26:12.182] sending init sequence 1 (FFFF)
[20:26:14.916] no response to any known code
[20:26:14.916] interface close

philr8

iTrader: (4)

did you also plug in the reflash connector and plug that into the OP2

5LEEPERISAH23I

iTrader: (23)

That op2 is plugged in...

On Evoscan everything works..

EcuFlash it comes up with that error code in post 1 ^

fugiwara

iTrader: (124)

maybe your ecu is locked

5LEEPERISAH23I

iTrader: (23)

both car's tho?

philr8

iTrader: (4)

i know your OP2 is plugged in, but what about the reflash connector to the white plug beside the obd2 port, Evoscan doesnt require the reflash connector to log!

Phil

tscompusa2

iTrader: (22)

does your laptop have wifi? i could remote in and see what the issue is if you want. could just be a driver issue.

5LEEPERISAH23I

iTrader: (23)

that white plug is not pluged in.. can u send me a pic of it

5LEEPERISAH23I

iTrader: (23)

i do not have wifi..

philr8

iTrader: (4)

thats your problem then!!!!!!!

This plugs into the white plug besides the OBDII port

5LEEPERISAH23I

iTrader: (23)

i dont have that aux pieces were u i order that?

ill post up pix of what i have tommorow