darkeye

Hi,

can someone check if this adress are correct for the ECT Fuel Compensation on 53040010 Rom please?

<table name="ECT Fuel Compensation #1" address="5ab31" category="Fuel" type="3D" level="2" swapxy="true" scaling="Percent128">
<table name="Load" address="61812" type="X Axis" elements="41" scaling="Load"/>
<table name="Coolant Temperature" address="61042" type="Y Axis" elements="9" scaling="Temp"/>
</table>

<table name="ECT Fuel Compensation #2" address="5aca9" category="Fuel" type="3D" level="2" swapxy="true" scaling="Percent128">
<table name="Load" address="61812" type="X Axis" elements="41" scaling="Load"/>
<table name="Coolant Temperature" address="61042" type="Y Axis" elements="9" scaling="Temp"/>
</table>


Best regards...

darkeye

Finaly, it was cold enough to test it.
It worked for "me".
14.7 AFR right after turning on the Ignition.

I set both table to 100%.

No problem with coldstart, as long as the ECT are higher than ~3°C.
Lower temps need higher (richer) values than 100%, otherwise the engine has trouble to start.

Eisen7

Does anyone have these definitions for 56910009?

crimson red

I think these addresses are correct for 56910009.(Caution: NOT TESTED.)

Eisen7

Thank you very much! It looks good to me compared to any other definition I've found so far.

Now to fix it so it's not running AFR's in the 11's during warmup.

Askar

thanks for your input !
I do have the same ROM ID which allow me to solve the rich problem while idle.

Regards,
A.Askar