Tephra Mod V3 Speed Density Tuning
#1
Newbie
Thread Starter
Join Date: May 2019
Location: Auckland
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Tephra Mod V3 Speed Density Tuning
Hi, is it possible to tune the EVOX with no air flow meter, completely speed density with this patch? Car is likely going to produce 400+wkw. Have planned to run it on speed density but at a first glance looking at the patch there does not appear to be an option for this?
Any help is much appreciated.
Any help is much appreciated.
#2
Evolving Member
Join Date: Apr 2008
Location: New Zealand
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
Hi PatPB
Check out link below
https://www.evolutionm.net/forums/ev...-resistor.html
I have been running Speed Density for a while now and happy to help a fellow kiwi P.M me
Check out link below
https://www.evolutionm.net/forums/ev...-resistor.html
I have been running Speed Density for a while now and happy to help a fellow kiwi P.M me
#3
Speed density vs MAF
For a weekend driver that will probably never see the track, is speed density necessary? The engine is built but I just do a little spirited driving every once in a while. My local tuner is pushing towards speed density but I'd rather keep the MAF.
Thread
Thread Starter
Forum
Replies
Last Post