Iveytune+AMS+Staatz 730+
Thread Starter
Evolved Member
iTrader: (12)
Joined: Sep 2005
Posts: 1,591
Likes: 1
From: Danbury, CT
Iveytune+AMS+Staatz 730+
I would like to thank the guys at Iveytune for the very professional and quick process of redoing my 2.3 to 2.0, rebuilding the head, rebuilding trans with longer 4th gear, and doing everything in a timely fashion. They also figured out how to setup the Idle speed control when the throttle body had no provision for it so now the car starts and idles like a stock car again.
Between the 2 weeks vacation during the Holidays and other various tuning trips Sean kept me up to date on all the processes the car was going through. He was even generous enough to drive the 110 Miles on a Sunday night with Pablo to pick my car up in CT. I could not be anymore happier with Sean, Will and Pablo.
We are going to upgrade a few aspects of the fuel system as it still runs stock lines and regulator and that limits us to 44psi, we want more so that will be done this week. This run is on c16. Made some impressive numbers. Basic rundown of the car.
AMS Race FMIC
AMS 62MM turbo kit
AMS VSR intake
Iveytune 2.0 (Converted from 2.3 and completely rebuilt by Iveytune)
Iveytune trans longer 4th gear
HKS FCON VPRO System pump map and c16
HKS DLI and stock coils.
Dual Walbros, stock lines and reg.
SMC Meth injection kit.
Tilton Carbon Carbon Clutch.
Cosworth m2 Cams.
Here's a vid of it on pump/meth..630whp 480tq
http://www.youtube.com/watch?v=5VzhtAeBedM
Between the 2 weeks vacation during the Holidays and other various tuning trips Sean kept me up to date on all the processes the car was going through. He was even generous enough to drive the 110 Miles on a Sunday night with Pablo to pick my car up in CT. I could not be anymore happier with Sean, Will and Pablo.
We are going to upgrade a few aspects of the fuel system as it still runs stock lines and regulator and that limits us to 44psi, we want more so that will be done this week. This run is on c16. Made some impressive numbers. Basic rundown of the car.
AMS Race FMIC
AMS 62MM turbo kit
AMS VSR intake
Iveytune 2.0 (Converted from 2.3 and completely rebuilt by Iveytune)
Iveytune trans longer 4th gear
HKS FCON VPRO System pump map and c16
HKS DLI and stock coils.
Dual Walbros, stock lines and reg.
SMC Meth injection kit.
Tilton Carbon Carbon Clutch.
Cosworth m2 Cams.
Here's a vid of it on pump/meth..630whp 480tq
http://www.youtube.com/watch?v=5VzhtAeBedM
Last edited by staatz; Jan 15, 2009 at 08:20 PM.
Trending Topics
Apart from that EVERYTHING, tuning, dyno, mech work tig welding etc is done inhouse.
Sean
I really had no clue. I figured they'd put cars together and such but really didnt know they built motors and tranny'sWe do it all, fab, trans rebuilds, engine builds, dyno, whatever is associated in putting cars together. The only thing that is done a few blocks up the road is machine work, we have an awsome shop that does all our machine work, but the actual assembly is done by us in house.
Apart from that EVERYTHING, tuning, dyno, mech work tig welding etc is done inhouse.
Sean
Apart from that EVERYTHING, tuning, dyno, mech work tig welding etc is done inhouse.
Sean
Does your machine shop do headwork as well Sean??? I'll pm or call the shop soon maybe we can talk over some ideas.
Last edited by gsrboi80; Jan 15, 2009 at 07:16 PM.
No problem we do all of that. Call up and speak to me or one of my guys.
Sean
I really had no clue. I figured they'd put cars together and such but really didnt know they built motors and tranny's
Great to know since i'm in the market for a built block and trans for my 110k EVO and I live in NJ and I didn't know of a local place i'd even consider. My plans were a Bushur block and tranny and do the install myself. But with a great shop like Ivey's theres no doubt in the quality work I would receive
Does your machine shop do headwork as well Sean??? I'll pm or call the shop soon maybe we can talk over some ideas.
Sean
I really had no clue. I figured they'd put cars together and such but really didnt know they built motors and tranny'sGreat to know since i'm in the market for a built block and trans for my 110k EVO and I live in NJ and I didn't know of a local place i'd even consider. My plans were a Bushur block and tranny and do the install myself. But with a great shop like Ivey's theres no doubt in the quality work I would receive
Does your machine shop do headwork as well Sean??? I'll pm or call the shop soon maybe we can talk over some ideas.