we have done 5-6 BBK cars in the past week...

all of them producing pretty awesome results..

we recently got a shipment of the newest JMfabrications (our partners in crime hee he) twin scroll exhaust manifolds...

I've always loved their manifold with the BBK as it provides a little more peak power... well the new one knocked my socks off... they revised the inlet ports, smoother radius', etc.... I didnt do a back to back, but this evo 8 made massive power over the stock turbo with some additional bolt ons..

The car had:

AMS fmic, AMS licp, UICP, Injen Intake, evo 8 9.8 cm hotside, mbc, turboback and our tune before making apprx 296whp/289wtq at 23.1-23.5 psi in 50 degree weather...

We then brought it back in, did headstuds, head gasket.... JM Fab manifold, CBRD BBK full with port, Megan O2 housing, 1000cc Injectors and a set of S1 cams...

We typically see 10-15 whp from the S1's on our dyno.... so here are the results...

I tuned it at 25psi, then ran some 28psi pulls, both with zero knock... on 93 octane... so the combination is working great.



you can see at the high boost 28psi pull, we were up 107whp over the stock turbo with these mods... and with 25 psi we were still up 97whp... and 50-67 wtq...

Very nice results for some nice changes.... minimal spool up loss!!

A nice street power level, and the owner was very pleased!

we have been seeing 375whp/335wtq to 410whp/360wtq depending on mods lately.... each car has gained atleast 60whp with turbo swap and retune... Im doing another today with the jmfab manifold, bbk, etc, on an evo ix with stock cams... so im excited to see what this one makes!

cheers

cb

 

nice results!!! i want this turbo so bad but no one will buy my fp red

 

nice power cb, i want this turbo too, but i just bought a red . (sad)

 

Damn I wanna be int he 400whp BBK club!

Nice work

 

Great results, Chadler!

BBK strikes again!

-Jalal

 

Nice numers! What type of dyno?

 

it's a low reading Mustang dyno doctor

 

Thanks. I was thinking that after seeing the baseline numbers on the 9.8 turbo. That really makes those numbers even more impressive!

 

I'm in the process of a 2.4 BBK Full build. I'll be sure to keep you in the loop. Nice numbers though

 

Very nice, bbk is looking great.

 

It's causing me physical pain waiting for the release of the BBK-B lol. Great work Chad!

 

Thanks for the shout-out about the car's numbers Chad...didn't expect to make that much power when we first talked about the BBK. The car is absolutely NASTY...so to anyone else out there on the fence about what turbo kit to run, definatly talk to Chad and investigate this BBK. No way did I dream of laying down 404hp on that dyno with that set-up...


Check out my page for the mod list and what everything looks like!

Once again, thanks Chad and Mark, the Evo is definatly 'evolved!'


Ryan

 

i thought it's 399whp
congrats on new power buddy

 

Can't wait to get the BBK in my car. Nice numbers Chad. I'll be seeing you soon hopefully.

 

NICE power for an Evo 8 head on pump!