I don't know what I can be doing wrong here?




this is my log but I can not make the program work well.

someone help me how to do a good dyno?

not too sure how to help you with that, but on a side note.. looks like a pretty good power band you have there!

I'm not the best at it, but it's pretty easy. Right before I'm about to do a pull, I start the logger since it takes a few seconds to begin. Switch to 3rd gear, at around 2800 rpms, hit full throttle until 6800ish. Make sure you're on a flat road. Stop,pull over and turn off log. I usually do 3 pulls each run. Open up file, the program does the rest as long as your profile is set up. If that's what you're doing, I don't have a clue, hopefully someone else will chime in. Are you sure you arent doing the pulls in second gear and spinning?

Delete it and download it again and see what happens , try using a different computer as well.

Force Fed jajaja very funny

Honestly, I lol'd....... sorry.

I threw your log into VD and came out with this.

I have my SO in spanish, I tried in three diferent computer with Win7 in spanish and the same, the program shows the same issue.

Yes I know in others computers the program works well but with my computer and others two did not want to works well.

Your graph is showing in gigantic numbers, there's your problem.

This might be just me but it looks like your tire height and your gear ratios have a comma ( , ) instead of a period ( . ), maybe that has something to do with it?

noup, I changed the ( , ) for ( . ) and worse, maybe the VD is not compatible with spanish Win7 OS

If you have an evo ix with evo 8 gears what would you be choosing evo 8 or ix?

The problem is only in my computer, others guys can runs my logs very well.

The reason I'm asking is because I have an evo 9 with evo 8 3rd and 4th gear but from the drop down list I dont know if I have choose evo 8 or ix?