Notices
Evo Dyno Tuning / Results Discuss vendor and member dyno tuning techniques, results and graphs.

Tuned Evo8

Thread Tools
 
Search this Thread
 
Old Aug 20, 2013 | 04:21 PM
  #1  
DSMTuner326's Avatar
Thread Starter
Newbie
 
Joined: May 2013
Posts: 18
Likes: 0
From: Gardners, PA
Tuned Evo8

Hey guys, figured id share by tuning results, just got it tuned by Grant at House of Power in New Oxford, Pa. Was tuned on a stock fuel system with the following mods

-ETS 3" FMIC with Short Route piping
-ETS Intake
-DNP Manifold
-3" Turbo-back Exhaust
-3"External Dump o2 Housing
-Stock turbo with 2.5" Compressor Outlet
-Hallman Pro Manual Boost controller set to 15psi

Results were 318hp, 289ft/lbs, we ran out of fuel so we stopped there, i ordered a Walbro 255 and im buying a set of Precision 1200cc Injectors off of him and will be getting retuned shorty. After that ill post a photo of the Dyno Graph, im hoping for over 350hp at 20psi
Reply
Old Aug 20, 2013 | 05:04 PM
  #2  
DisgustipatedM3's Avatar
Evolving Member
iTrader: (2)
 
Joined: Aug 2012
Posts: 235
Likes: 0
From: Long Beach, CA
You need to buy a 3 port boost controller. It will help a LOT!
Reply
Old Aug 20, 2013 | 05:12 PM
  #3  
prowakeskater's Avatar
Evolved Member
iTrader: (14)
 
Joined: Jan 2011
Posts: 1,010
Likes: 2
From: Cincinnati
I wouldnt even post up results for a 15psi tune. Sounds like they have no idea what theyre doing
Reply
Old Aug 20, 2013 | 05:33 PM
  #4  
DSMTuner326's Avatar
Thread Starter
Newbie
 
Joined: May 2013
Posts: 18
Likes: 0
From: Gardners, PA
i wouldnt be posting the graph of a 15 psi tune, itll be the 20psi tune
Reply
Old Aug 20, 2013 | 06:42 PM
  #5  
mrboost05's Avatar
Evolved Member
15 Year Member
iTrader: (25)
 
Joined: Sep 2006
Posts: 1,132
Likes: 2
From: maryland/west chester pa
Originally Posted by prowakeskater
I wouldnt even post up results for a 15psi tune. Sounds like they have no idea what theyre doing
if you read he mentioned he was out of fuel whats the harm in him posting his results now ? and then when he goes back ive also got tuned by grant and my car runs amazing ive been 130 on pump gas he's tuning everything from evos to gtr's i think he knows what hes doing

Last edited by mrboost05; Aug 20, 2013 at 07:25 PM.
Reply
Old Aug 20, 2013 | 07:10 PM
  #6  
bitterchild's Avatar
Newbie
iTrader: (20)
 
Joined: Jun 2012
Posts: 92
Likes: 0
From: MD
those jokers mess up a lot of cars
Reply
Old Aug 22, 2013 | 06:32 PM
  #7  
EvolutionIX219's Avatar
Evolving Member
iTrader: (1)
 
Joined: Sep 2011
Posts: 239
Likes: 1
From: Maryland
I live close by, I was thinking about hitting this dude up. Be sure to post results
Reply
Old Aug 26, 2013 | 11:04 AM
  #8  
bitterchild's Avatar
Newbie
iTrader: (20)
 
Joined: Jun 2012
Posts: 92
Likes: 0
From: MD
Originally Posted by EvolutionIX219
I live close by, I was thinking about hitting this dude up. Be sure to post results
do yourself a favor and just go to CBRD.
Reply
Old Aug 26, 2013 | 07:59 PM
  #9  
Randal's Avatar
Guest
 
Joined: Aug 2012
Posts: 396
Likes: 0
From: Georgia
Nice! Good luck
Reply
Old Aug 30, 2013 | 03:02 PM
  #10  
DSMTuner326's Avatar
Thread Starter
Newbie
 
Joined: May 2013
Posts: 18
Likes: 0
From: Gardners, PA
Alright guys i got the final numbers from my tune by Grant at House of Power in New Oxford, after de-bugging my car of boost leaks and having my fender liner fly off at 120mph the final numbers were 335hp 351ft/lbs, thats with a new Walbro255 and PTE1200cc injectors, running 25psi on stock turbo and internals, im extremely happy with the outcome and the drivability of the car now, improved MPG and improved idle quality and overal driving, i HIGHLY recommend House of Power for your needs, if its Tuning, fabrication, full builds Grants the guy to go to!!!!
Attached Thumbnails Tuned Evo8-before_and_after.jpg  
Reply
Old Aug 30, 2013 | 04:36 PM
  #11  
ronaldo9's Avatar
Evolved Member
iTrader: (2)
 
Joined: Oct 2008
Posts: 809
Likes: 26
From: New Jersey
You made awesome power even on 15 psi I"m only looking for 300whp lol. Wondering if I should bother adding a walbro pump. Congrats on the tune and numbers. Enjoy your tune.
Reply
Old Sep 1, 2013 | 10:38 AM
  #12  
misterevo8's Avatar
Evolving Member
 
Joined: Dec 2012
Posts: 180
Likes: 1
From: USA
nice, im almost the same on mods but in y sig, 91 octane.
Reply
Old Sep 5, 2013 | 05:40 PM
  #13  
DSMTuner326's Avatar
Thread Starter
Newbie
 
Joined: May 2013
Posts: 18
Likes: 0
From: Gardners, PA
Thanks guys, im real happy with the way it runs n the power, ill be adding GSC2 cams when i get my timing belt redone, ill be shooting for 400whp, Ronaldo9, id recommend getting a pump just for safe keeping, it wont be as stressful on the pump then it would with the factory one, plus if you ever wanna do injectors n make a little more power youll have plenty of fuel to do it with
Reply
Old Sep 5, 2013 | 05:50 PM
  #14  
freelance991's Avatar
Newbie
 
Joined: Apr 2012
Posts: 15
Likes: 0
From: Reno, NV
nice setup
Reply
Old Sep 8, 2013 | 12:46 PM
  #15  
rstchris's Avatar
Evolving Member
iTrader: (10)
 
Joined: Jun 2010
Posts: 178
Likes: 1
From: kingman AZ
17whp from another 10psi. Time to eliminate the bottleneck.
Reply



All times are GMT -7. The time now is 04:29 PM.