Car looks good. Love white Evo's

 

thanks) Me2))

But i would love to have a second one in other colour))) I mean Evo ofcourse

 

lol wouldn't we all

 

Season 2015 update: instaled HKS intake manifold and 90mm throtle. Bride seats are instaled.
Looking forward to get Mickey Tompson et street radials 2, sparktech pro CDI ignition and Ohlins road and track. After going to weight the car and do the retune.

Also I think we have achieved quite a good result and it was very trange to me that people are not interested in it...

 

Picture

 

nice numbers how do u like the aquamist setup? The torque number looks pretty high for stock turbo. Have you put it on a real dyno yet or just vd?

 

I find Aquamist kit the best meth solution on the market. Yes we have placed it on the Dyno, photos are attached to the first post. 751nm 440whp on the chassis SuperFlow dyno.

 

all these great numbers with meth kits.... MUST HAVE!

nice work dude!

 

I'm glad to see someone else using an Aquamist kit. Great numbers on the stock turbo

Did you get in to the 10s?

 

I am glad that at least someone is interested

Aquamist is definitely the best bolt-on kit you can get on the market.

Regarding 10s we still having cold weather back in Moscow, so there is lack of traction...

Also 3rd Turbosmart actuator has failed, so now we are going to do the external westegate + stock actuator combo, hope it is going to work. Because that Turbosmart 22-25 psi is not a very good product from my experience, all 3 didn't even made 5k km... Membrane starts to pass air through and basically car becomes 100% duty cycle all the way... But the last one was even more fun, pictures below)

 

Yes, Aquamist products and the support from Richard is just excellent!

I had a turbosmart wastegate and didn't have this issue but I didn't run it for so long. I wish you luck on getting into the 10s

I'm also on 93 + meth so I can relate to you. Let's see in a weeks time what numbers I make with a stock short block and a GTX3076 @ 2.5 bar hopefully.

Keep us updated.

 

Good luck on that one!

Hope it is going to hold well

 

It will hold I want to find out what it makes on a 2.0 before getting a 2.3 short block. If I like it I just might run it for a while

 

So just a quick update. This is how we made it work)

 

Stock actuator + external westegate didn't work quiet well because of the back presure... VE drops rapidly after 4,5k rpm.

We have modified it again a bit

Also virtual dyno of the test results so far))

P.S. never buy Turbosmart stock replacment actuator for evo 8-9 turbo...