New TSCOMPUSA tuned evo 8! - EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

Notices
Evo Dyno Tuning and Results Discuss vendor and member dyno tuning techniques, results and graphs.
Sponsored by:
Sponsored by:

New TSCOMPUSA tuned evo 8!

Reply

 
 
 
Old May 11, 2017, 11:11 AM
  #1  
Newbie
Thread Starter
 
Waferz's Avatar
 
Join Date: Mar 2017
Location: Louisiana
Posts: 18
Thanked 1 Time in 1 Post
New TSCOMPUSA tuned evo 8!

What's up guys? New evo owner from Louisiana here. Years ago I owned a 2005 Subaru Sti and couldn't help but to get back into something awd! I bought the car late last year and put a few miles on it, repainted it, then threw it on our lift for a small build. The compression numbers were quite impressive despite having a good bit of milage so we are interested to see where this goes. Thanks to a lot of help from Tom at tscompusa, the guys at ETS, Russ at real street performance, and the guys at MAperformance, I think we are just about ready for a tune. I am very interested to see what kind of numbers we put down!!
Here are some pictures when I recieved the car





Last edited by Waferz; May 11, 2017 at 11:17 AM.
Waferz is offline  
Reply With Quote
Old May 11, 2017, 11:14 AM
  #2  
Newbie
Thread Starter
 
Waferz's Avatar
 
Join Date: Mar 2017
Location: Louisiana
Posts: 18
Thanked 1 Time in 1 Post
Here are some current shots... Man I need some good window tint!








Last edited by Waferz; May 11, 2017 at 11:31 AM.
Waferz is offline  
Reply With Quote
Old May 11, 2017, 11:15 AM
  #3  
Newbie
Thread Starter
 
Waferz's Avatar
 
Join Date: Mar 2017
Location: Louisiana
Posts: 18
Thanked 1 Time in 1 Post
We will be running FP black with gsc s2 cams and fic 1100 injectors on 93. There is no e85 in my area unfortunately. Are there any other evo owners in Louisiana? Would be awesome to get some meets going!

Hopefully within the next few weeks Tom and I have some awesome numbers to throw at you guys! Thanks for stopping by and reading my thread!
Waferz is offline  
Reply With Quote
Old May 11, 2017, 06:19 PM
  #4  
Former Sponsor
iTrader: (31)
 
Join Date: Oct 2005
Location: PA
Posts: 10,301
Thanked 56 Times in 48 Posts
Nice transformation on the car before & after purchase.
tscompusa is offline  
Reply With Quote
Old May 12, 2017, 04:55 AM
  #5  
Evolved Member
 
2winscroll's Avatar
 
Join Date: Mar 2014
Location: wisconsin
Posts: 576
Thanked 26 Times in 24 Posts
Very nice
Paint looks awsome! Very clean build. Did you make that gauge cluster? Waiting 2 see your numbers, should be a killer street setup!
2winscroll is offline  
Reply With Quote
The Following User Says Thank You to 2winscroll For This Useful Post:
Waferz (May 12, 2017)
Old May 12, 2017, 05:16 AM
  #6  
Newbie
Thread Starter
 
Waferz's Avatar
 
Join Date: Mar 2017
Location: Louisiana
Posts: 18
Thanked 1 Time in 1 Post
Originally Posted by 2winscroll View Post
Very nice
Paint looks awsome! Very clean build. Did you make that gauge cluster? Waiting 2 see your numbers, should be a killer street setup!
Thank you! The gauge setup is from gruppe-s you can find it on Amazon! Highly recommended it was a perfect fit. They also offer it for 60mm gauges
Waferz is offline  
Reply With Quote
The Following User Says Thank You to Waferz For This Useful Post:
2winscroll (May 12, 2017)
Old May 12, 2017, 11:29 PM
  #7  
Former Sponsor
iTrader: (31)
 
Join Date: Oct 2005
Location: PA
Posts: 10,301
Thanked 56 Times in 48 Posts
You bought that gauge pod already like that? I assumed you painted it black. I never seen one gloss black like that before.
tscompusa is offline  
Reply With Quote
Old May 13, 2017, 01:40 AM
  #8  
Newbie
Thread Starter
 
Waferz's Avatar
 
Join Date: Mar 2017
Location: Louisiana
Posts: 18
Thanked 1 Time in 1 Post
Originally Posted by tscompusa View Post
You bought that gauge pod already like that? I assumed you painted it black. I never seen one gloss black like that before.
Oh no, sorry I should have clarified that I sprayed the gauge pod myself along with the few trim grey pieces that border it because the stock paint was pretty worn out.
Waferz is offline  
Reply With Quote
Old May 13, 2017, 03:21 PM
  #9  
Newbie
iTrader: (1)
 
moneyhun89's Avatar
 
Join Date: Apr 2013
Location: temple tx
Posts: 29
Thanks: 0
Thanked 1 Time in 1 Post
That's my old car. Traded it to a guy in Houston a little over a year ago for a c6.
moneyhun89 is offline  
Reply With Quote
Old May 13, 2017, 03:27 PM
  #10  
Newbie
iTrader: (1)
 
moneyhun89's Avatar
 
Join Date: Apr 2013
Location: temple tx
Posts: 29
Thanks: 0
Thanked 1 Time in 1 Post
My buddy bought it when it was about 2yrs old and I bought it from him about a year and half ago and drove it for a few months before the guy offered to trade a c6 straight up for it. I think it had 130-140k when I got rid of it. I did most of the mait on the car for my buddy and it was kept up well but he treated the inside and paint like crap. I spent over 20hrs cut and buffing the car and shampooing the inside. trans was rebuilt by mits around 70k miles.
moneyhun89 is offline  
Reply With Quote
Old May 13, 2017, 03:40 PM
  #11  
Newbie
iTrader: (1)
 
moneyhun89's Avatar
 
Join Date: Apr 2013
Location: temple tx
Posts: 29
Thanks: 0
Thanked 1 Time in 1 Post





moneyhun89 is offline  
Reply With Quote
Old May 13, 2017, 03:41 PM
  #12  
Newbie
Thread Starter
 
Waferz's Avatar
 
Join Date: Mar 2017
Location: Louisiana
Posts: 18
Thanked 1 Time in 1 Post
Originally Posted by moneyhun89 View Post
My buddy bought it when it was about 2yrs old and I bought it from him about a year and half ago and drove it for a few months before the guy offered to trade a c6 straight up for it. I think it had 130-140k when I got rid of it. I did most of the mait on the car for my buddy and it was kept up well but he treated the inside and paint like crap. I spent over 20hrs cut and buffing the car and shampooing the inside. trans was rebuilt by mits around 70k miles.
Yeah the paint wasn't the greatest and the interior needs some help still. Not too sure what I will do with it yet
Waferz is offline  
Reply With Quote
Old May 13, 2017, 03:43 PM
  #13  
Newbie
iTrader: (1)
 
moneyhun89's Avatar
 
Join Date: Apr 2013
Location: temple tx
Posts: 29
Thanks: 0
Thanked 1 Time in 1 Post





after
moneyhun89 is offline  
Reply With Quote
The Following User Says Thank You to moneyhun89 For This Useful Post:
Waferz (May 13, 2017)
Old May 13, 2017, 03:45 PM
  #14  
Newbie
iTrader: (1)
 
moneyhun89's Avatar
 
Join Date: Apr 2013
Location: temple tx
Posts: 29
Thanks: 0
Thanked 1 Time in 1 Post
Yeah he was a fire fighter so the inside was bad. glad the car is still alive and someone is taking care of it.
moneyhun89 is offline  
Reply With Quote
Old May 13, 2017, 03:55 PM
  #15  
Newbie
Thread Starter
 
Waferz's Avatar
 
Join Date: Mar 2017
Location: Louisiana
Posts: 18
Thanked 1 Time in 1 Post
Originally Posted by moneyhun89 View Post
Yeah he was a fire fighter so the inside was bad. glad the car is still alive and someone is taking care of it.
I've enjoyed It a ton so far man. Really easy cars to work with. Thank you for the pics I didn't have many of when I got it!
Waferz is offline  
Reply With Quote

Thread Tools
Search this Thread

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
 
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in: