Evo 1 baseline
So first time dyno resulted in 202 hp and 188 ft-lbs @ 13psi with stock 510 injectors and stock fuel pump.
It ran A/F of 13 after 4k RPM's(I know that is lean, have since installed a walbro 255) So any comments or suggestions are welcome http://tyleh.com/image_files/evo%20dyno.jpg |
pics of the 1!
|
any idea on afr's now?
|
No idea on a/f now, I only installed the walbro last night.
http://tyleh.com/image_files/IMG_0416.JPG http://tyleh.com/image_files/IMG_0419.JPG |
Cool car, reminds me to much of a old impreza.
|
The Evo... of the Evo has come a long way
|
Another Evo 1 owner :beer:
The power seems low even for a stock car, but then it is a Mustang dyon so it's probably reasonable. There is a lot you can do with an Evo I to make it fast. Most of the DSM upgrades will work. My car runs low 12s with the stock turbo, intercooler and piping - just more boost, ECU tuning (self done chip), HKS 264 cams, Walbro, intake and an exhaust. I haven't dyno'd it in a long while so I don't know the power. |
that is a cool car. any more photos? interior?
|
Mustang dyno's usually read 25% lower, so that works out to 270 hp at the crank. I just checked the ECU and found out its chiped and socketed.
http://tyleh.com/image_files/IMG_0426.JPG http://tyleh.com/image_files/silver%...0interior3.jpg |
I Was able to find my stock AF chart for my Evo II.
I'll try to dig up the dyno chart. I think it made 225whp on a dyno dynamics, bog standard as they say. http://www.dentsport.com/gallery/d/1...ynoafr_JPG.jpg |
that is a pretty cool cAr!!!
|
All times are GMT -7. The time now is 04:52 AM. |
© 2024 MH Sub I, LLC dba Internet Brands