|
2Dr EVO into 10's on BFG KDW2
SO we went to BOTI in Fontana CA finals on Nov 22, 2009. It was a last minute thing for me because I didn't even know about this even until the day before the event. I took the Mirage down to Cali to see what she runs on a well preped track. I was hoping to hit 10's on BFG KDW2, 18x9.5 HRE 3-piece wheels, and Big brake kit (8piston front, 6piston rear). Just the way the car sits when I go to carshows.lol.. The car weighs 3200lbs with driver in it btw.
THANK YOU TO ALL MY SPONSORS and FRIENDS to get me this far! First pass of the day after missing the 1st round qualifying runs: http://www.youtube.com/watch?v=eh0Y9ITjSO0 Qualified 2nd, and got me a buy run (1st 10.8 at 138 mph pass on the car): http://www.youtube.com/watch?v=f6EMqNTVkd0 Semi finals, (back to back 10's passes): http://www.youtube.com/watch?v=_3hZeryZ49Q The 3rd run, I lost to a subaru that ran 8.9 at 150+mph... over all, it was a nice race. took 2nd place on Street Tuner class. My very first time racing on a event like this. Not bad eh? lol.. So far my goal this year were met. I wanted to break in the 700 HP range and hit 10's on street tires by the end of 2009. I did 742 awhp and 603 awtrq and rand 10's back to back. anyways, here's the dyno sheet and the dyno video: http://s223.photobucket.com/albums/d...2HPDyno010.flv http://i223.photobucket.com/albums/d...PDynosheet.jpg |
Originally Posted by Miralution
(Post 7751376)
I was hoping to hit 10's on BFG KDW2, HRE wheels, and BBK. ......... I did 742 awhp and 603 awtrq and rand 10's back to back.
Cool car and congrats! |
Big brake kit?
|
Probably right Steve because it would require lareger diameter lower profile wheels/tires! Good thinking there!
|
Im sorry i meant big brake kit.. i have 8 pistons front calipers and 6 pistons rear calipers. I have a AMS 850r turbo kit, not the BBK turbo kit.. sorry for the misunderstanding. hehe
|
very nice run.
|
Well done Archie!!!!!
|
Do you have a post on what all is done to your car? Who built your car? I have been wondering how to do this kind of set up on a mirage.
|
Thanks guys... Adam from MD did the awd swap.. I took the car to the next level. here's the link of whats done on the car and some pics: http://lvracingscene.com/index.php?o...tion&Itemid=60
|
Was this a direct drop in? Or did you have to mod the motor mounts or get custom ones? How much did the swap cost you? Is it a pain in the a$$?
|
cool car. bout time one of these popped up. I have been wanting to build one for years. But just cant get past the early version weighs so much less. my car is at 2575 with roll bar, complete interior and A/C. http://i51.photobucket.com/albums/f3...ge_edited3.jpg
|
how much does it roughly cost to build something like this?
|
Originally Posted by FL_SilverEvo8
(Post 7758871)
how much does it roughly cost to build something like this?
just the way the car sits now without the sponsor help, would prolly cost me over 25k, i think: WP Pro BBK 8 piston front/6 piston rear -$7k HRE 3-piece wheels - $6k BFG kdw2 - $1k 2.1 destroke by Trevtec Motorsport - $4500 SBR stage 5 head - $1500 Sheptrans evo4 upgraded tranny - $2500 Sheptrans stage 3 evo5 TC w/ evo8 quaife lsd - $1800 Status Ring CF seats - $3200/pair Paint job - $3500 Custom chromoly 4-point cage - $700 Takata long harness - $600 |
BTW, these dyno pulls and track passes are all done on E85 fuel
|
What kinda 60' were you pulling? What kinda dyno is that? Seems like 740 should get ya more then a high ten but then again not knowing your launch traction I can't speculate.
Nice job on your goals. |
| All times are GMT -7. The time now is 12:16 PM. |
© 2026 MH Sub I, LLC dba Internet Brands