IveyTune 2.0 High Compression, Buschur FF 6262, ID2000's
 

Cars all done guys. Thanks IVEYTUNE.

Mods are as follows:

-2.0 liter. Manley custom high compression pistons, manley turbo tuff rods, hks head gasket, arp l19 headstuds
-Headgames unported head, ferrea valvetrain and dual springs, kiggly hla oil pressure regulator.
-Buschur forward facing turbo kit, precision 6262 bb turbo, precision wastegate, custom KN air filter, forced performance oil feed kit
-kelford 272
-AMS half radiator kit
-AMS upper IC piping with tial 50mm bov
-Buschur Race FMIC
-Exedy Triple clutch w STM clutch fork stopper
-AEM standalone
-ID2000 High Impedance Injectors
-AMS fuel rail
-Aeromotive FPR
-Buschur Double pumper with SS -8an lines from the tank
-Spoolin' Up COP
-AMS f1-i intake manifold
-Boomba throttle body

http://a5.sphotos.ak.fbcdn.net/hphot..._5643667_n.jpg

Below is the break in video:

http://www.youtube.com/watch?v=OPfyA...el_video_title

Today Sean sends me an Email:

The car at 39 psi and e70. Some more power left on the table when the real stuff comes in. {thumbup}

http://a2.sphotos.ak.fbcdn.net/hphot..._1536030_n.jpg

Why didnt you go with a 2.1 built motor?

Because I did not want to go to a 4g64 block. I had a perfectly good 4g63 motor.

nice setup binh. how is it a headgames head if it has no porting though? wouldnt that make it a stock head? or does headgames do custom valvetrain stuff?

Grats dude! Ivey sure does awesome work on the 2.0 motors :D Ivey is the only shop to touch my car.

Congrats. to the owner and :beer: to Iveytune..

Crazy as it sounds its a stock head. I wasn't chasing any records so I said the hell with it. Now that I think back I probably should have ported the damn thing.

i bet it sounds damn good with that valvetrain though. awesome setup man.

Do you like the the 2.0 better than the 2.1 you had before?

Really nice power on e70. Once the good gas comes in that thing should pick up a few more horses. Really like the color!

The car isn't nearly maxed out, next time on the dyno we will really go at it. In this day and age 39 psi really isnt alot, and I am not leaning on it too hard on the winter blend.

It's a headgames head, and the valvejob is alot of what makes the heads make good power.

Sean

Damn guys that car looks familiar :).


Some great work again from Sean & the Ivey team!

Whats the compression?

Very nice work Sean!!! Hope the east coast is warming up!!


Mitch

Thanks Mitch.
Actually it is warming up. I know where you are it's probably ridiculously cold, the east coast is mild compared to that.

Hope all is well.

Sean