EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

EvolutionM - Mitsubishi Lancer and Lancer Evolution Community (https://www.evolutionm.net/forums/)
-   Evo Dyno Tuning / Results (https://www.evolutionm.net/forums/evo-dyno-tuning-results-299/)
-   -   So I finally decided to get my 20g Evo tuned... Results to come (tscompusa tuned) (https://www.evolutionm.net/forums/evo-dyno-tuning-results/558093-so-i-finally-decided-get-my-20g-evo-tuned-results-come-tscompusa-tuned.html)

howell May 28, 2011 07:40 PM

So I finally decided to get my 20g Evo tuned... Results to come (tscompusa tuned)
 
Tom and I are working on tuning my evo viii remotely. The car is primarily a bolt on car. Current list of mods are

*20g turbo ported
*FP 17psi actuator
*HKS 272 cams
*injen UICP
*injen LICP
*injen intake
*mishimoto intercooler
*Grimmspeed EBCS
*wahlbro 255
*PTE 880's
*ARP head studs
*3"TBE with test pipe
*Megan 02 housing
*exhaust manifold
*crushed 1g bov


I am hoping to hit between 380-400 on the virtual dyno (I know I should have upgraded to some s2, and a better turbo)

Josh@MooreAutomotive May 28, 2011 10:36 PM

Only one thing I can see in this list besides the cams is the Crushed BOV as they are not very good. Once toms starts getting that turbo to scream you will most likely need to replace it, I personaly would do it before he tunes it so you dont have a issue that causes him to stop in the middle. I personaly saw a tune that came into our shop that was leaking from the BOV and it was being overcompensated for a boost leak and the A/F was all out of wack. I am also tuning with tom and he has assisted in me fixing allot of bottlenecks in the car.{thumbup}

localtoys73 May 28, 2011 11:11 PM

I have a synapse for sale ...would fix that issue. PM if your interested.

howell May 29, 2011 07:57 AM

I think the crushed bov will work for me, I was running 25psi on a street tune and it was holding. But I do appreciate the recommendation. It may be something I upgrade here soon though.

localtoys73 May 29, 2011 08:01 AM

the synapse will hold anything you can throw at it and drives like stock. Atleast mine did even when I switched to the tial and speed density the synapse responded quicker(I should have kept the synapse on)

Guerillah May 29, 2011 01:16 PM

My crushed IX metal bov holds 30psi no problem

gsrboi80 May 29, 2011 01:19 PM


Originally Posted by Guerillah (Post 9354706)
My crushed IX metal bov holds 30psi no problem

So does mine. 5 years and counting {thumbup}

nightwalker May 30, 2011 12:31 AM

Which/Who's 20g turbo are you using?

howell May 30, 2011 06:52 AM

it is the 20g from turbochargers.com

http://www.turbochargers.com/store/p...de4229b86887c1

howell May 31, 2011 08:43 PM

So we ran out of time yesterday, but we did make some progress.

BigT Jun 1, 2011 09:55 AM

Well, thats a ****ty update.

Next time, don't make a thread until the numbers are ready with a graph to back up.

MR Turco Jun 2, 2011 05:38 AM

need a dyno chart to post in this section. PM me when you have one available to post


All times are GMT -7. The time now is 11:20 AM.


© 2024 MH Sub I, LLC dba Internet Brands