Stock Block FP Black S3 cams E85 600WHP+
I made some final touches on Naithan's stock block evo 8 RS with an fp black and S3 cams.
The boost curve you see is by design to work with the torque curve. I have full control over the curve. The blue line was just done 20min ago (aug 12th 2013 8:53pm). The logger messed up at lower rpm so don't pay it any mind until 6500+ Mods: FP Black DBB Ported Buschur double pumper megan racing tbe exhaust with test pipes grimmspeed 3 port GSC S3 cams AGP FMIC / lower pipe FIC 1250cc Toxic Fab Tubular exhaust Manifold (my old exhaust manifold) TSComptuned 4" SD intake MAP o2 Dump (my old o2 dump) Sparktech COP Forge RS Bov (my old bov) http://www.tscomptuned.net/_images/d...-final-e85.jpg On behalf of Naithan's request i will share the stock cams results as well overlayed with the s3's: http://www.tscomptuned.net/_images/d...3-vs-stock.jpg please note this is in no way a true back to back comparison that should be taken seriously. way too many variables, and if i wanted to i could extract way more power out of the car as it sat right now, but it makes no sense to do so on a stock block. http://www.tscomptuned.net/_images/d...an-sticker.jpg |
Another amazing fp black car tuned by tscomp!
|
Very nice{thumbup}
|
Hey guys, this is my car. All I have to say is wow. Me and Tom started working together on my car last July when I was still on stock turbo and he did an amazing job like most of you already know he is known for. Well after getting bored with the stock turbo very quickly, I went with the FP Black and some s3's cams. Ofcourse we had some hiccups over the past few months from running outta fuel to just not having time to tune this damn thing.
Finally though we came up with the numbers seen above and I am beyong impressed. Tom has made this power the safest way possible since this is my daily driver was able to keep this thing together. I can't say thank you enough to Tom, as he was very patient with my schedule and very quick to respond to all my emails even though the guy is swamped tuning other vehicles. So again, thank you Tom and I can't wait to get the motor built to extract even more power. |
What a cool boost curve. That car must feel like a jet with that increasing tq curve instead of it spiking. lol. Congrats!
Now get that block built and make another 150wtq. |
^^ thanks man. Yea I'm tryin to pick up a deployment rite now to get the motor and trans built. I can only imagine what 550+ trq feels like LOL
|
Originally Posted by ReignMan24
(Post 10919975)
Hey guys, this is my car. All I have to say is wow. Me and Tom started working together on my car last July when I was still on stock turbo and he did an amazing job like most of you already know he is known for. Well after getting bored with the stock turbo very quickly, I went with the FP Black and some s3's cams. Ofcourse we had some hiccups over the past few months from running outta fuel to just not having time to tune this damn thing.
Finally though we came up with the numbers seen above and I am beyong impressed. Tom has made this power the safest way possible since this is my daily driver was able to keep this thing together. I can't say thank you enough to Tom, as he was very patient with my schedule and very quick to respond to all my emails even though the guy is swamped tuning other vehicles. So again, thank you Tom and I can't wait to get the motor built to extract even more power.
Originally Posted by fantrman
(Post 10920076)
What a cool boost curve. That car must feel like a jet with that increasing tq curve instead of it spiking. lol. Congrats!
Now get that block built and make another 150wtq. i tried to be alittle more conservative on his though to attempt to not bend rods.
Originally Posted by ReignMan24
(Post 10920083)
^^ thanks man. Yea I'm tryin to pick up a deployment rite now to get the motor and trans built. I can only imagine what 550+ trq feels like LOL
|
nice job tom
|
Yea Tom is a really good guy and has hooked me up multiple times with various things. We have something in the works right now, but no need to tell quite yet :)
|
I love how the torque does not fall off. And then on a stock 2.0L is just ridiculous (in a good way).
|
Thats a hell of alot of boost on the stock block.
I dont have the balls to go past 30psi. lol. |
^^ Trust me, I was very hesitant on doing this much power on the stock block. But I really trust Tom and put it in his hands. I also rarely get on it since it's my daily, plus I've also never rowed through 1-4 first in the car ever lol
|
what are the IDC's on those injectors
|
^^ Couldn't tell ya to be honest. You'd have to find out from Tom.
|
Another proven FP Black turbo!
|
All times are GMT -7. The time now is 09:40 PM. |
© 2024 MH Sub I, LLC dba Internet Brands