Ronnie's evo 9 SSL 2.0L 6466 S3 cams E85 | 9.86 @ 145.77
Please scroll to page 4 to see the most recent updates.
Those who know Ronnie know his cars not light. and hes not about to do anything about it either. this is a true 100% full weight evo with all the luxury. AC, in dash touch screen dvd, leather seats, leather door panels, leather everything. this car lacks nothing luxury and is super clean inside and out. That said, with Ronnie in it the car weighs in at 3600lbs right on the nose. The car was driven from MA to OH long long drive, and i met Ronnie there, then we road tuned it up to 770whp roughly Car drives like stock, and runs WOT like a race car. best of both worlds in this evo. We are not trying to extract 100% full power out of this car unless we put it on a dyno and closely monitor the gains per timing added. so for now i will call this a "conservative" tune. Full mod list: engine (2.0): -GSC S3 cams -Kiggly valve springs with Ti retainers -Supertech Inconel Exhaust valves -Supertech Nitride coated Intake Valves -ARP L19 head studs -Wiseco HD2 10.5:1 pistons -Manley TurboTuff I-Beam rods -Clevite bearings -ARP rod bolts/ARP mains -Fluidampr crank pulley -Dimple brand magnetic drain plug -STM oil cooler delete fuel: -AEM fuel rail -FIC 2150cc Injectors -Aeromotive adjustable fuel pressure regulator -Buschur Dual Fuel Pump Setup (2 modified walbro 255s) -stock feed/return lines intake: -MAP Rev2 Ported Intake Manifold -Mil.Spec ported throttle body -VR Speed short route UICP -Tial Q BOV -Buschur 4" race intercooler -Buschur lower ic pipe -4" JMF speed density intake pipe -9" AEM Dryflo air filter -Calan Catch can setup -10 to VC exhaust: -JDL T3 tubular manifold -PTE 6466 T3 .82AR Turbo -JDL v-band o2, dump, downpipe -VR Speed/Muse vband cat-back -Tial MVR 44mm Wastegate suspension: -Fortune Auto "drag spec" coilovers -Wedsport TC105N 17x9.5" rims with Dunlop Direzza 255/45 -Project Kics R40 NeoChrome Revo lugs -Stock EVO MR BBS with M&H 245/45 Drag Radials drivetrain: -Shep Trans rebuilt with Evo 8 3rd/4th gears -Shep Trans built acd tcase with hardened ring/pinion -Quaife LSD in tcase -Quartermaster 8leg Twin disc -AWD Motorsports aluminum driveshaft -Torque Solution driveshaft bushings For the rest of the mod list showing exterior pieces and interior go here: https://www.evolutionm.net/forums/ev...ld-thread.html graph below: (Me & Steve & Ronnie in car) http://www.tscomptuned.net/_images/d...ronnie-ssl.jpg Here's video of the 10.11 pass and i got another vid of him with a slower pass also that day. http://www.tscomptuned.net/_images/d...70385471_o.jpg http://sphotos-a.ak.fbcdn.net/hphoto...40027106_n.jpg http://sphotos-g.ak.fbcdn.net/hphoto...35990624_n.jpg https://fbcdn-sphotos-c-a.akamaihd.n...10690595_n.jpg keep in mind boost pressure was down another 2psi then it was at night when we were tuning around 3-4am in 50F temps. So around 740 during the pass at almost 145 at full weight. (3600lb) heres my footage i took with my D7000 - I had sunscreen in my eyes so it was like a idiot trying to work a camera, so don't pay it any mind i didn't focus it properly. Heres a slip taken that was slightly slower/and not as quick: (id share 10.1 pass but slip flew out his car during WOT pull on the way home :lol: :crap: ) http://www.tscomptuned.net/_images/d...onnie/10.2.jpg As you can see car has a 9 hiding in it as is even at 3600lb with better 60ft! |
This thing will have 9s in it this season. Not bad for my first time out on the setup with e85.
Thanks again Tom for the late night road tune. |
Ronnie good hanging! I went in his car the car deff moves that for sure! Ronnie is def one of the better drivers at the shootout for sure just thought id throw that out there.
|
Originally Posted by Ronnie Size
(Post 10927758)
This thing will have 9s in it this season. Not bad for my first time out on the setup with e85.
Thanks again Tom for the late night road tune.
Originally Posted by 5LEEPERISAH23I
(Post 10928415)
Ronnie good hanging! I went in his car the car deff moves that for sure! Ronnie is def one of the better drivers at the shootout for sure just thought id throw that out there.
And yes Ronnie is a driver mod big time. he can shift super fast. |
This thing definitely rolls out lol. I'm starting to think I have a serious issue tho because now that I saw this video I want more power already LOL
|
guys seems you know what you´re doing! very interested in your services. great driving and beautiful car!
|
wow nice car! i have to ask what lip do you have on your car ronnie?
|
3600lbs 10.1 imagine 3000lbs easy 9.5 car!
|
Very impressive build
|
Thanks guys.
The lip is a ralliart replica that came with the car. |
I saw this car in person. Very nice car with great end results!
|
Awsome #'s all around. Need a ride bro when I come to Springfield.
|
Thanks guys. Ronnie is good at wrenching cars for sure and his evo is built very well and it was easy to make power with it.
|
what clutch does this car have?
|
QM 8 leg
|
All times are GMT -7. The time now is 12:38 AM. |
© 2024 MH Sub I, LLC dba Internet Brands