hey all, im under going some sever weight reduction..... i cant find very much info on stripping the harness. i pulled the entire thing. started with the passenger tail and i am now up to the dash, all that i want to have working is:

brake lights, turn signals, license plate lights and headlights. tach, speed, coolant temp, flashers.


i am assuming i need to leave the imobilezer and obd II port because it's still going to be on stock ecu


so some questions... what are the little connectors under the dash that dont go anywhere. there just plugged, can i cut thoose?

car is an evo8 gsr. stripped. i mean stripped.

please help me!

 

starting with the passenger side....

 

can anyone direct me in the right direction?

 

The best plan of faction is going to be to get a muli-meter and test which connections are which. If the connection is not connected to anything, then you can cut it as it goes to nothing...

There cant be that much weight to be saved in that haress to be worth the trouble shooting....

 

^ there absolutely can!!!! thanks for the info but it looks like upwards of 15lbs in the harness for things i dont need. volt meter has been helping but i was hopping someone could tell me wich connections are just straight useless.


thanks for the input i appreciate it.

 

anyone know what ETACS-ECU is?

 

Controls body functions like power locks, security.....etc.

 

^ so i cant remove it if i want my lights to work :-(