Hi guys!I just make the harness pinout swap in evo 4 harness and the result was a little smoke from the big pinout harness ecu position and no power and signal in fuel pump relays and injectors to!I use 560 injectors from latest evo!The diagram is the follow also cut the pin 6 and reconect the pin 40 with the 92.Also send the ecu to disable the immo first!I know this post covered many times but i have big problem!Also in the dash i have only the light of hand brake all the others off.My project is an evo4wd cj colt my second project car!