Is This Possible? EVO 7 RHD navi dash to LHD EVO8/9
1 Attachment(s)
like the title said... here is the pic. Please help~ :beer:
|
yes but will require custom fab work
|
Originally Posted by llDemonll
(Post 11093618)
yes but will require custom fab work
|
Best bet is to search russia / UK area for salvage cars
|
thanks... I actually found a guy here that sells a brand new one... but the post was back in 2008...
https://www.evolutionm.net/forums/sa...brand-new.html |
Yea, basically the most important part you need is the center section; the actual dash trim would be optional as that can be custom molded. you might try and find a friend in russia who can help you source parts from there :)
|
Originally Posted by llDemonll
(Post 11096498)
Yea, basically the most important part you need is the center section; the actual dash trim would be optional as that can be custom molded. you might try and find a friend in russia who can help you source parts from there :)
I'll try my best. |
I've found this guy's LHD 2001 Lanevo 7 OZ edition, and he posted a LHD dash~!!! been trying to contact him for a while, but no reply... does anyone know which country in Europe has this?
http://www.cardomain.com/ride/450931...ubishi-lancer/ http://carphotos.cardomain.com/ride_...0001_large.jpg |
you do know that those AC / Heater controls wont work in a US car, correct? They're all electronic and ours are cable-driven
I'm still working on my conversion, haven't had a second car for a long time now so that i can leave the evo in pieces |
The pictures are from a RHD car. Look at the gauges needles. Also on the first post the enbroided "mitsubishi" on the floor mat is inverted.
|
Originally Posted by LCS
(Post 11305786)
The pictures are from a RHD car. Look at the gauges needles. Also on the first post the enbroided "mitsubishi" on the floor mat is inverted.
However, the 2nd picture is from another source and not edited by me. So I can't say that the 2nd one is also edited from a RHD interior. |
Originally Posted by llDemonll
(Post 11304226)
you do know that those AC / Heater controls wont work in a US car, correct? They're all electronic and ours are cable-driven
I'm still working on my conversion, haven't had a second car for a long time now so that i can leave the evo in pieces This is not a big deal, but it'll be nice for that extra 2-din opening~ That's ultimately my goal. Hope you guys can be on the look out for me, thanks~ |
that's a built-in mitsubishi unit, not a normal double din mount. you can always fab up mounts for a double din up there i suppose though
|
Originally Posted by llDemonll
(Post 11315933)
that's a built-in mitsubishi unit, not a normal double din mount. you can always fab up mounts for a double din up there i suppose though
|
Hi! Everyone!
I want up this topic and say: "Yes! It is possible!" I have succesfuly done with this on my MMC Lancer 9. First of all I want to say that there are two ways to get this done. First - rebuild the RHD panel from Japanese Lancer, the second - find the original LHD panel from Mitsubishi Virage. I did this in the first way. Also I have installed the automacit climat control (but this is the other story :)) That's how it looks for me: https://cimg0.ibsrv.net/gimg/www.evo...008e4998b7.jpg https://cimg1.ibsrv.net/gimg/www.evo...7c1e2adbdc.jpg https://cimg2.ibsrv.net/gimg/www.evo...08653324fc.jpg I did this few years ago. Because I was not able to find the original LHD panel. But now I have few original LHD panels! And going to sell them on the eBay. So if someone still interested in this panels, here is my listing: https://www.ebay.com/itm/OEM-MItsubi...m/162827194505 Also feel free to ask me any question. I'm done with hard work of investigation the MMC Lancer models for the different countries and now I'm a real guru of this panels :) |
All times are GMT -7. The time now is 11:04 PM. |
© 2024 MH Sub I, LLC dba Internet Brands