Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Anyone with the RMR CF Gauge Pod...

Old Oct 6, 2004 | 07:39 AM
  #1  
TheSmacker's Avatar
Thread Starter
Newbie
 
Joined: Aug 2004
Posts: 74
Likes: 0
From: Punxsutawney, PA
Anyone with the RMR CF Gauge Pod...

Can anyone that has this installed tell me if it obstucts your view of the Tach/Other Dash Gauges much? Anyone that has some pics of it installed (Preferably of what the drivers view is like) would also be helpful. Thanks!
Reply
Old Oct 6, 2004 | 07:46 AM
  #2  
Hooptie157's Avatar
Evolved Member
iTrader: (8)
 
Joined: Jul 2003
Posts: 726
Likes: 0
From: Northern Jersey


You can see the whole tach including 1. This is a bad angle. The only things you cannot see is the trip odometer and regular odo. You have to lean to the side to see those. No biggie.
Reply
Old Oct 6, 2004 | 09:00 AM
  #3  
TheSmacker's Avatar
Thread Starter
Newbie
 
Joined: Aug 2004
Posts: 74
Likes: 0
From: Punxsutawney, PA
Thanks a lot man, that's exactly what I wanted to know
Reply
Old Oct 6, 2004 | 10:36 AM
  #4  
jong's Avatar
Evolving Member
iTrader: (5)
 
Joined: Mar 2004
Posts: 225
Likes: 0
From: CO and MD
I second Hooptie's comments. Mine isn't installed yet but I gave it a test fit and it does not obstruct anything that you need while you are driving. It also looks like it should give a good view of the gauge that's installed in it too. FWIW.

Last edited by jong; Oct 11, 2004 at 12:23 AM.
Reply
Old Oct 10, 2004 | 11:31 PM
  #5  
crusin_lancer's Avatar
Evolved Member
iTrader: (10)
 
Joined: Aug 2002
Posts: 751
Likes: 0
From: On the Roads
what size of gauge is that?
Reply


Thread Tools
Search this Thread

All times are GMT -7. The time now is 07:30 AM.