catch can...should I get one?
I'm deffinitly getting one. The other day I installed my MBC I had to take all the piping off and I also took off the turbo intake off. I ran my fingers through the inside part of the intake pipe and it was full of oil. I washed out the intake pipe and cleaned the turbo with a cotton cloth (very carefully). So I would get one if I were you.
Hey guys,
I have the DIY catch can (don't have the thread handy, but searching on DIY catch can will probably work, heh).
I have one on both the PCV side and the breather side. The ventilation side catches way more oil. I think the breather side is what deposits the oil in the maf pipe. Defintely recommend getting one and plumbing both sides..
~lates,
FB
I have the DIY catch can (don't have the thread handy, but searching on DIY catch can will probably work, heh).
I have one on both the PCV side and the breather side. The ventilation side catches way more oil. I think the breather side is what deposits the oil in the maf pipe. Defintely recommend getting one and plumbing both sides..
~lates,
FB


