Hey guys well i posted once before about some products that our new shop is going to be manufacturing for the EVO. We got our first products done with a whole list of new products coming out in the following months. Here is a list of the products that we will be making available very soon.

AVAILABLE NOW! AlienAuto Coolant Line - Better Fitment for manifolds, Better Cooling for Radiator Fluid, Has the true JDM look. Made of Stainless Steel - TIG welded - Piece Cut - Presure Tested and will be polished to a shine.

Here are some pics of the Coolant line that we have available now. Price is $80 each. PLEASE PM ME FOR MORE INFORMATION OR PLEASE CHECKOUT OUR WEBSITE FOR INFORMATION ABOUT CONTACTING US!


Full Race Turbo Manifold "COMING SOON"
Prototype Intake Manifold - "COMING SOON"
Prototype Fuel System - Dual Intake Walbro Pumps, New sending unit, All Braided lines, Aeromotive Fuel Pressure Regulator, AlienAuto Fuel Rail (A new design that has not been done on the evo yet. Definetly going to be able to provide the best flow and most even distrabution of fuel then any other fuel rail more on this later) "COMING SOON"
4" Race Cat-Back - "COMING SOON"
AlienAuto Turbo Kit - GT42 compressor with GT35 exhaust. We are working very closly to design a turbo that will outflow the GT35 but keep the spool about the same. We still have a ways to go on this but its in the works. It will be capable of over 750whp and still be in the center island of the effiecency range (NICE) "COMING SOON"

Please check out the website at www.alienauto.com
It is still under construction but will have our product line within a week.

Thank You
Chris

 

You might want to upgrade to vendor status before they shut u down :\

 

Sorry will work on that right now. Sorry mods please dont shut it down im getting the vendor going right now!

Chris

 

is it free to get vendor status?

 

Not to criticize your coolant lines too much here, but why didn't you just buy pre-bent mandrel sections of tubing for your bends? It would look much cleaner than all those cut sections, and would flow better also. JC Whitney has some I think.

 

The purpose on our 2G coolant line is because you cant get a mandrel bend to clear the manifold tight enough. The pupose on our EVO coolant lines is for looks. We like the JDM feel and look and if you look at all the new JDM products they are all piece cut and welded into sections. More work and more time but it shows interest in there products. Our exhaust tips will also have this look. Most people like the look and feel and some don’t. Personal preference i guess.

BTW guys this is our prototype coolant line. The production will have even cleaner welds and it will be suplied with colored couplers and the clamps of your choice along with being polished.


Chris

 

JDM does not necessarily mean that it is the best way of doing it. But if you are shooting for aesthetics only, go for it.

 

what do you think of course not

 

Its the look that we are going for on somthing like a coolant line. Its not going to be restrictive or hurt anything. With our exhaust they are all done on CNC Mandrel Benders and then the tips are done piece cut and tig welded.

But agian to each his own. Personally i love the look. It just shows that more time was put into somthing instead of throwing a pipe in a machine and hitting start and be done with it.

Chris

 

My $.02:

It's ugly. Maybe if it flowed better and came with silcone couplings at each end with some heavy t-clamps. Maybe then, just maybe. Personnaly I would just go with the silicone hoses and be done with it.

Good luck.

 

It does come with Silicone couplers and T-Bolt Clamps. And it doesnt flow anyworse then a silcone hose. Infact it with a aftermarket turbo manifold it will save you from wrapping you silicone hose from melting or heating up. It also will be polishe to a chome finish.

But as far as your opinion please keep it to yourself if you dont like it no need to flame please.

Thank You
Chris

 

Your little coolant line would be better if you put a fitting to run a temp sensor on it...

 

This wouldnt be a problem. Not everybody would want that but we can do a custom one for the people that do. Just let me know when ordering.

Chris

 

Good job Chris, knowing your dedication for performance, these are going to come out looking nice in the final product.

Bumpity, bump!!

 

. guys, what we see above is just a prove on how good the craftsmanship is. The welds are great on this pc and if you can’t see that then you are missing the point. This pc is work of art and I know the welder who did this. He is simply amazing. Let’s give them some props as more competition means less prices for us