Electric Super Charger???
Think outside the box, I didn't start this thread to flame the intake chargers. Just think about it from a different perspective. Hell, think about the energy we lose as heat. Maybe there is a way to improve a cooling system to the point where it becomes a mini-steam engine that could drive the turbine or augment its thrust along with the exhaust. Or imagine a way to cycle only the hydrogen and oxygen out of the exhaust and reuse it as fuel that recharges a battery
How about one of these? You can dial your own boost.

Or this one for the really high power. You may need to change your injectors so you don't run lean.

Or this one for the really high power. You may need to change your injectors so you don't run lean.
Last edited by BMan; Aug 13, 2005 at 07:09 AM.
This has allready been done... can't remember the company but I saw their product when I was at SEMA. To make a long story short the product would make 7psi at 1500rpm and turn off once the turbo reached 20psi. Only problem was the cost of the system was too much and the install way to complicated.
FWIW.. you can put a small single fogger nitrous setup as a pre spool which IMO would work better and cost less. But thumbs up for trying to be inventive.
FWIW.. you can put a small single fogger nitrous setup as a pre spool which IMO would work better and cost less. But thumbs up for trying to be inventive.
That's just great
. Funny thing is, my buddy and I actually did that toro leafblower setup to an 88 integra just for giggles.
. Funny thing is, my buddy and I actually did that toro leafblower setup to an 88 integra just for giggles.
Originally Posted by BMan
How about one of these? You can dial your own boost.

Or this one for the really high power. You may need to change your injectors so you don't run lean.


Or this one for the really high power. You may need to change your injectors so you don't run lean.

Thread
Thread Starter
Forum
Replies
Last Post
ddubdb3
For Sale - Miscellaneous Automotive
6
Sep 18, 2011 07:07 PM





