Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

walbro sputter...

Thread Tools
 
Search this Thread
 
Old Nov 19, 2005 | 02:18 PM
  #1  
JasonS's Avatar
Thread Starter
Evolving Member
iTrader: (1)
 
Joined: Mar 2003
Posts: 249
Likes: 0
From: Kings Mountain, NC
walbro sputter...

Just put in my 2nd fuel pump and both sputter when the rpms and boost go up.
Car starts to buck until I get off the gas. I can ease the gas in until about 6k without any hesitation, but if I floor it, it won't go. Any ideas?
Yes, I searched.
My only thought is that the pump isn't sealing into the black grommet on the top of the pump.
What gives?
Reply
Old Nov 19, 2005 | 02:27 PM
  #2  
MitsuEvoIIX's Avatar
Evolving Member
iTrader: (11)
 
Joined: Jul 2005
Posts: 346
Likes: 0
From: New York
My only thought is that the pump isn't sealing into the black grommet on the top of the pump.
thats probably what it is..other people also see this problem
Reply
Old Nov 19, 2005 | 02:29 PM
  #3  
SilverEvo8owner's Avatar
Evolved Member
iTrader: (3)
 
Joined: Apr 2003
Posts: 1,907
Likes: 0
From: dublin, oxford, chillicothe OH
what mods do you have?

Fuel possibly?
Reply
Old Nov 19, 2005 | 02:34 PM
  #4  
JasonS's Avatar
Thread Starter
Evolving Member
iTrader: (1)
 
Joined: Mar 2003
Posts: 249
Likes: 0
From: Kings Mountain, NC
Vishnu stage 1, perrin full exhaust with no cat.
Reply
Old Nov 19, 2005 | 04:46 PM
  #5  
nyrican's Avatar
Newbie
iTrader: (4)
 
Joined: Dec 2004
Posts: 85
Likes: 0
From: Chicopee MA
Make sure you have all of those plastic/ rubber spacers/grommet things on. It happened to me I thought one wasnt needed . Put it on an all was good.
Reply




All times are GMT -7. The time now is 08:24 PM.