ive got a greddy spec 2 and all the lines and everything are hooded up ok. but this im my problem. I have the boost warning set at 30spi. those who have the spec 2 know im talking about. i try to target 25 psi and when the head unit reads 25 psi and my boost gauge the warining starts going crazy like im hitting 30psi ??? strange when my gauge is reading 25 psi. Also sometimes i get what almost feels like spark cut from hitting peak preasure on the map. is it possible that one of lines to the mani is getting 30psi before the head unit reads it?? any help would be great or if you need me to give better examples. thanx

 

The unit needs to be "reset" every time it is turned on. It sets the warning limit to 14.5 psi every time it is turned on until you interact with it. I got into the habit of switching from my low setting to my high setting and back every time I turned it on. Try doing that and see if it still happens.

-Paul