Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

264/272 cams=louder exhaust?

Thread Tools
 
Search this Thread
 
Old Jun 14, 2006 | 08:03 PM
  #16  
Sgt Blamo's Avatar
Evolved Member
iTrader: (1)
 
Joined: Oct 2005
Posts: 796
Likes: 0
From: South Florida
Don't pull that "hide it from the wife" BS! I used to play that stupid game! You should be honest with her and she just might start treating you like a man. I know I used to do it too!
I'm not trying to **** you off, but how can you expect her to take you seriously if you act like a little kid? Take it from someone who knows firsthand and has been married 20 years to one woman. You'll be a lot happier and get a lot more, if ya know what I mean
BRW,
I had an 11.5" barrel AC556 with a sidefolder,laser,reddot and suppressor, what a blast!
Reply
Old Jun 14, 2006 | 08:13 PM
  #17  
TTP Engineering's Avatar
Account Disabled
iTrader: (465)
 
Joined: May 2005
Posts: 8,824
Likes: 2
From: Central FL
With your GReddy exhaust, I think it will be lopey but not necessarily louder.

I did get in lots of Fidanza camgears in today in Red and Silver if you decide on those also I will degree them for maximum performance and a smoother idle.

Along with your custom reflash and additional ignition timing at idle, you may just get away with it.

Sgt Blamo, I'm going to give you a ring tommorrow. Been real busy this week but giving you a ring is on my list. Sorry for the delay.

Last edited by TTP Engineering; Jun 14, 2006 at 08:16 PM.
Reply
Old Jun 15, 2006 | 04:48 AM
  #18  
AC556k's Avatar
Thread Starter
Evolving Member
iTrader: (3)
 
Joined: Aug 2005
Posts: 199
Likes: 0
From: Bradenton, FL
Originally Posted by Sgt Blamo
Don't pull that "hide it from the wife" BS! I used to play that stupid game! You should be honest with her and she just might start treating you like a man. I know I used to do it too!
I'm not trying to **** you off, but how can you expect her to take you seriously if you act like a little kid? Take it from someone who knows firsthand and has been married 20 years to one woman. You'll be a lot happier and get a lot more, if ya know what I mean
BRW,
I had an 11.5" barrel AC556 with a sidefolder,laser,reddot and suppressor, what a blast!
Only been 1 1/2 yrs for me so I am still learning to be a husband . Did you have the SS or blued AC5556? I have several machineguns but the AC has the classiest look of them all .
Reply
Old Jun 15, 2006 | 06:15 PM
  #19  
Sgt Blamo's Avatar
Evolved Member
iTrader: (1)
 
Joined: Oct 2005
Posts: 796
Likes: 0
From: South Florida
AC556K,

Hey man, I hope I wasn't an *** the way I came accross!

I had a blued version with a Choat sidefolder, I hated the factory folding stock! I later bead blasted all the metal parts and sprayed black moly. I also installed aCiener .22 conv kit, talk about a blast to shoot! I bought a ton of the russian .22 ammo and still have some left from 10 yrs ago. I also had a RPB MAC 10, 9MM with a forward grip/ comp and an AM stock, a few AOWs, suppressors etc.
I sold off most of it a while back and can neither confirm nor deny that I have any weapons of any kind today!
Reply
Old Jun 15, 2006 | 07:22 PM
  #20  
jho0001's Avatar
Newbie
 
Joined: Jun 2006
Posts: 8
Likes: 0
From: Singapore
Hi Ac556k, I'm thinking of installing HKS the 264/264 or 264/272, let me know how your ride it without tune and with tune (should you decide to go for it).

Cheers
Reply
Old Jun 16, 2006 | 09:10 AM
  #21  
AC556k's Avatar
Thread Starter
Evolving Member
iTrader: (3)
 
Joined: Aug 2005
Posts: 199
Likes: 0
From: Bradenton, FL
Originally Posted by jho0001
Hi Ac556k, I'm thinking of installing HKS the 264/264 or 264/272, let me know how your ride it without tune and with tune (should you decide to go for it).

Cheers
It's not if it's when and when is tomorrow! In 24hrs I will be headed back from Orlando with some nice tuned cams in my car! Thanks to:
www.ttp-engineering.com
Official Authorized Zeitronix Dealer
Official Authorized MAFTPro Dealer & Tuner
Authorized Megan Racing Dealer
Tilton Engineering Clutch Dealer
EcuTeK ECU reflash tuner- Evo V-IX

Free plug Scott
Reply
Old Jun 16, 2006 | 09:19 AM
  #22  
Genesis8's Avatar
Evolved Member
iTrader: (14)
 
Joined: Aug 2004
Posts: 782
Likes: 0
From: Wisconsin
Your car is gonna be louder with the cams no matter what.
Reply
Old Jun 16, 2006 | 09:52 AM
  #23  
TTP Engineering's Avatar
Account Disabled
iTrader: (465)
 
Joined: May 2005
Posts: 8,824
Likes: 2
From: Central FL
Originally Posted by AC556k
It's not if it's when and when is tomorrow! In 24hrs I will be headed back from Orlando with some nice tuned cams in my car! Thanks to:
www.ttp-engineering.com
Official Authorized Zeitronix Dealer
Official Authorized MAFTPro Dealer & Tuner
Authorized Megan Racing Dealer
Tilton Engineering Clutch Dealer
EcuTeK ECU reflash tuner- Evo V-IX

Free plug Scott
Cams arrived yesterday. You are set to go.
Reply
Old Jun 16, 2006 | 10:00 AM
  #24  
spyderx's Avatar
Evolved Member
iTrader: (17)
 
Joined: Apr 2003
Posts: 1,127
Likes: 1
From: Baltimore/ DC
After cams, expect exhaust noise to be x2!

Mine did, after 272/272. ..

I suppose it depends on her hearing sensitivity.
Reply
Old Jun 16, 2006 | 01:53 PM
  #25  
JoeWalker4G63's Avatar
Evolving Member
iTrader: (6)
 
Joined: Dec 2003
Posts: 247
Likes: 0
From: Greensboro, NC
My car got super loud after the cam install and ECU reflash. Everyone tells me it sounds like a really loud Hayabusa or something. I'll admit...it is freaking loud actually.
Reply
Old Jun 18, 2006 | 03:05 PM
  #26  
cdupont03's Avatar
Evolving Member
iTrader: (31)
 
Joined: Jun 2006
Posts: 324
Likes: 0
From: Marietta, PA
I have HKS 264/272 and I didnt notice a huge change in the volume, but you can here the longer duration at idle. BTW looking for a HKS 272 intake camgear if anyone is getting rid of 1.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
evolved8 bs
For Sale/WTB - Engine / Drivetrain / Power
3
Nov 29, 2015 09:55 PM
Evo8tuning
Private 'Evo 1 - 9' For Sale / Wanted
8
Mar 3, 2005 09:29 AM
DSMBRETT
Private 'Evo 1 - 9' For Sale / Wanted
7
Dec 1, 2004 07:16 PM
Yaroslav
Evo Engine / Turbo / Drivetrain
4
Jan 31, 2004 12:39 AM
Bonefish
Evo Engine / Turbo / Drivetrain
9
Jan 13, 2004 05:03 PM




All times are GMT -7. The time now is 11:13 AM.