Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

280 cam install

Thread Tools
 
Search this Thread
 
Old Jan 21, 2007 | 11:47 PM
  #1  
grenade's Avatar
Thread Starter
Evolving Member
iTrader: (4)
 
Joined: Sep 2006
Posts: 247
Likes: 0
From: Here
280 cam install

Well, cam's went in this weekend. I followed Evomoto.com's how to, and it was perfect. Nothing was incorrect, or blurry. I would suggest this to anyone with some good skills in mechanics.

I also bled the lifters like timzcat suggested. This was VERY easy, and well worth it, as after 20 minutes of firing the car up, there is Zero tick. Awesome deal guys.

The car is awesome. It pulls like none other. As far as a loss of low end? WTF if i wanted low end, ide go buy a v8 manual diesel truck. None lost here, only gained. I also love the way it sounds at idle, and when cruizing around town partily on the throttle..

I also got the wide band in, and did about 4-5 pulls from 1-4, and about 2-3 from 2-6..

@ 24ish lbs, I am getting 11.3-12.1 with the A/F getting richer as the gear's go up.. This is NOT tuned for the cams, just what I was running before (Yes, The tune was rich)

Over all, ide like to thank timzcat, and evomoto.com for their write ups and how too's. The cams are well worth it.

Take care. good night.
Reply




All times are GMT -7. The time now is 05:00 PM.