anyone got picture of knock link sensor installed?
anyone got picture of knock link sensor installed?
anyone got picture?
i know it goes somewhere on the block
where is the best locatino for 4g63 ?
please post some picture for all of us here,
thanks~
i know not many people here got knock link.
but knock link is very effective way to detat knock and it will save tons of money.
truest me been there done that, this is why i m adding lots of guages and knock link for added safety,
i know it goes somewhere on the block
where is the best locatino for 4g63 ?
please post some picture for all of us here,
thanks~
i know not many people here got knock link.
but knock link is very effective way to detat knock and it will save tons of money.
truest me been there done that, this is why i m adding lots of guages and knock link for added safety,
Why don't you PM, Scott, at TTP Engineering? He is a KnockLink dealer and uses it on his race car. He posted up once about where to install the sensor. I think it is on the same cylinder where factory sensor is located but on the opposite side of the block(if my memory serves me well
).
Edit: Wish that I could furnish some pics, but I didn't use the provided knock sensor as I just tapped into the factory knock sensor wire when I installed the KnockLink on my car.
).Edit: Wish that I could furnish some pics, but I didn't use the provided knock sensor as I just tapped into the factory knock sensor wire when I installed the KnockLink on my car.
Last edited by sparky; Feb 19, 2007 at 09:49 PM.
Look, w/o me doing a search and finding the thread, and just going off memory, which has proven to be not crystal clear......The knock sensor that comes with the Knocklink is externally threaded.
If you locate the factory knock sensor which should be fairly easy to locate, and if I recall is threaded into a boss located at the #2 cylinder location. Then on the opposite side of the block also located near the #2 cylinder(but on the opposite side), there is an identical threaded boss cast into the engine block.
From what I recall, the provided Knocklink knock sensor threads into that boss with no difficulty whatsoever. Now, this, as I said is based on my recollection of a post by Scott, quite a while back. So, take it with a grain of salt. Or do a search. Goodluck.
If you locate the factory knock sensor which should be fairly easy to locate, and if I recall is threaded into a boss located at the #2 cylinder location. Then on the opposite side of the block also located near the #2 cylinder(but on the opposite side), there is an identical threaded boss cast into the engine block.
From what I recall, the provided Knocklink knock sensor threads into that boss with no difficulty whatsoever. Now, this, as I said is based on my recollection of a post by Scott, quite a while back. So, take it with a grain of salt. Or do a search. Goodluck.
