Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

i need advice

Thread Tools
 
Search this Thread
 
Old Jun 17, 2007 | 12:15 PM
  #1  
fastassfourdoor's Avatar
Thread Starter
Evolving Member
 
Joined: Nov 2005
Posts: 238
Likes: 0
From: columbus georgia
i need advice

i am still in iraq but however i have almost came to a final decision. I want peoples advice on wether or not to go with a 50trim with meth or a 35r with meth. And also another thing i am curious about is how much money some of you guys have spent on having ur stroker motors installed and by installed i mean, engine taken out and bored out and then have all the new pistons and everything put into it.. The reason i am asking this is because i think that if i go with the 35r I want to do stroker to get some torque out of it...it will be street driven. See Im not trying to spend over 10k and im wondering if i can get the stroker and 35r with meth with 10k. What are your guys suggestions...
Reply
Old Jun 17, 2007 | 12:17 PM
  #2  
fastassfourdoor's Avatar
Thread Starter
Evolving Member
 
Joined: Nov 2005
Posts: 238
Likes: 0
From: columbus georgia
also guys all of this will be done at topspeed by doug.
Reply
Old Jun 17, 2007 | 12:33 PM
  #3  
evodrivesme's Avatar
Evolved Member
iTrader: (7)
 
Joined: Jun 2006
Posts: 593
Likes: 0
From: Pistolvania
stroker and 37r with no meth
Reply
Old Jun 17, 2007 | 12:43 PM
  #4  
2theMAX's Avatar
Evolving Member
iTrader: (59)
 
Joined: Jun 2005
Posts: 394
Likes: 0
From: Down South
Defintitely 35/37R with a stroker. I hope Doug builds engines better than he tunes.
Reply
Old Jun 17, 2007 | 03:36 PM
  #5  
Warrtalon's Avatar
Evolved Member
iTrader: (6)
 
Joined: Jun 2004
Posts: 20,790
Likes: 2
From: Long Island, NY
Originally Posted by fastassfourdoor
i am still in iraq but however i have almost came to a final decision. I want peoples advice on wether or not to go with a 50trim with meth or a 35r with meth. And also another thing i am curious about is how much money some of you guys have spent on having ur stroker motors installed and by installed i mean, engine taken out and bored out and then have all the new pistons and everything put into it.. The reason i am asking this is because i think that if i go with the 35r I want to do stroker to get some torque out of it...it will be street driven. See Im not trying to spend over 10k and im wondering if i can get the stroker and 35r with meth with 10k. What are your guys suggestions...
You'll need more than 10k for all of that. Remember, there's a lot of peripheral mods you have to do when going huge like that: injectors, fuel rail, other fuel items, the whole 35r kit (not just the turbo itself), the whole motor + gaskets + fluids, DP, IC piping, install and retune.
Reply




All times are GMT -7. The time now is 05:43 AM.