Buschur exhaust probs
Evolved Member
Joined: Dec 2002
Posts: 1,014
Likes: 0
Originally posted by 2Cool
954DRGSR, trade cars with him and see what happens. Also, not every car will run the same, some are just naturally stronger from the factory. You can't compare two different cars with similiar setups, it just don't work. Have him dyno before and after the exhaust swap, under similiar air temps/conditions, thats the only way you can judge improvement.
I know my exhaust increased off the line wheel spin capability, and it sure sounds a hell of a lot better.
stvbreal, call Buschur, likely they will make good on the exhaust, as it sounds like a freak flaw.
954DRGSR, trade cars with him and see what happens. Also, not every car will run the same, some are just naturally stronger from the factory. You can't compare two different cars with similiar setups, it just don't work. Have him dyno before and after the exhaust swap, under similiar air temps/conditions, thats the only way you can judge improvement.
I know my exhaust increased off the line wheel spin capability, and it sure sounds a hell of a lot better.
stvbreal, call Buschur, likely they will make good on the exhaust, as it sounds like a freak flaw.
My Buschur Turbo-back won't center in the cut-out of the bumper...Any fixes? It always pulls left...It's annoying me, I don't want any black residue left on the bumper. All connections are there and secure. Help?
stvbreal here is link to Dave's post about the exhaust on his forums. David is always behind his products, so you shouldn't worry. Give him a call, I am sure he'll help you out with this.
http://buschurforums.com/forum/viewt...hlight=exhaust
DrEvo
http://buschurforums.com/forum/viewt...hlight=exhaust
DrEvo
Hi Steve my name is Jarrod i work at Buschur Racing. We contacted all of our customers who bought our exhausts and sent them a gusset to go between the hanger and get's welded to the exhaust to keep it from breaking. Myabe we could not get ahold of you or soemthing if you didn't receive the gusset. Give me a call here at the shop at 440-839-1900 and I will get you taken care of we will send out the gusset and any local welding shop should take care of you for like 10 bucks. or you could send us back the pipe and we will do it here. thanks good luck
Originally posted by WannaRace
My Buschur Turbo-back won't center in the cut-out of the bumper...Any fixes? It always pulls left...It's annoying me, I don't want any black residue left on the bumper. All connections are there and secure. Help?
My Buschur Turbo-back won't center in the cut-out of the bumper...Any fixes? It always pulls left...It's annoying me, I don't want any black residue left on the bumper. All connections are there and secure. Help?
Originally posted by limey
"stronger from the factory"?....you mean some cars have the correct cam timing and some don't.......we will see a lot of this until Mitsubishi recalls the slow evos......my 0.02c
"stronger from the factory"?....you mean some cars have the correct cam timing and some don't.......we will see a lot of this until Mitsubishi recalls the slow evos......my 0.02c
Last edited by strat; Aug 26, 2003 at 04:32 AM.
Jarrod is correct. We had an issue with the early exhaust systems we shipped. I made a post on our website about it and we also called every single customer that bought a system from us and told them about it. We shipped out gussets to anyone that wanted them to do the fix themselves OR we paid the shipping both ways for them to ship their system back here so we could do the fix for them.
As for someone being slower with our 3" exhaust on their car than yours, something is wrong with the car or the driver.
David Buschur
www.buschurracing.com
As for someone being slower with our 3" exhaust on their car than yours, something is wrong with the car or the driver.
David Buschur
www.buschurracing.com