Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Tranmission Help

Thread Tools
 
Search this Thread
 
Old Aug 23, 2007 | 05:42 PM
  #1  
xxNosTankxx's Avatar
Thread Starter
Evolving Member
iTrader: (6)
 
Joined: Apr 2007
Posts: 270
Likes: 0
From: New York
Tranmission Help

So my car's making a noise. Basically whats happening is when I'm in a gear and I let off the gas I get this grinding sound. I'm noticing the noise more when I'm in a higher gear. There is no change in the feel of my clutch so I don't think it's that.

I had my car up on blocks today and it seems like the noise is coming directly from the bell housing, does'nt seem to be T-case. The noise gets much louder when the car has a load on it, but it does quietly make the noise when its out of gear as well. To me it seems like I may've chipped a tooth on one of the gears, but I'm no tranny expert.

I need some help, opinions, thoughts, suggestions, and advice. Any comments would be helpful

More importantly I need a reputable transmission shop on Long Island (NY) that will work on my car. If need be I will get the car towed out to Jersey if there is a good shop out there.

Who who you guys trust with working on your Evo? If you already had tranny work done on your car, who should I seek out or stay away from?

Thanks in advance guys

-Nick
Reply
Old Aug 23, 2007 | 06:58 PM
  #2  
xxNosTankxx's Avatar
Thread Starter
Evolving Member
iTrader: (6)
 
Joined: Apr 2007
Posts: 270
Likes: 0
From: New York
bump for help
Reply
Old Aug 23, 2007 | 07:44 PM
  #3  
justboosted02's Avatar
Evolved Member
15 Year Member
Liked
Loved
Community Favorite
iTrader: (31)
 
Joined: Jun 2006
Posts: 1,926
Likes: 14
From: northeast
sounds like your clutch, my car makes a similar noise but i have an act clutch
Reply
Old Aug 23, 2007 | 08:30 PM
  #4  
xxNosTankxx's Avatar
Thread Starter
Evolving Member
iTrader: (6)
 
Joined: Apr 2007
Posts: 270
Likes: 0
From: New York
I dont think its clutch. Wouldn't I feel a change in the pedal if it was clutch? And if its clutch would the noise differ depending on the load?
Reply
Old Aug 23, 2007 | 10:56 PM
  #5  
xxNosTankxx's Avatar
Thread Starter
Evolving Member
iTrader: (6)
 
Joined: Apr 2007
Posts: 270
Likes: 0
From: New York
Anyone know a shop around here?
Reply




All times are GMT -7. The time now is 08:12 AM.