Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Question on XS Engineering products...

Thread Tools
 
Search this Thread
 
Old Aug 30, 2007 | 08:00 AM
  #1  
EvoIXMR's Avatar
Thread Starter
Evolved Member
iTrader: (66)
 
Joined: Jul 2005
Posts: 1,606
Likes: 0
Question on XS Engineering products...

I have an Evo in my possession that seems to have a lot of XS Engineering products and I don't know much about them and want to know if anyone has personal experience with them and what people think of them....

1) Racemax cams - Supposedly 272 cams, car idles OK. Needs a good tune, though! Not sure of gains. Car does have full crower valvetrain.

2) Racemax FMIC and piping - Has the upper IC pipe, lower pipe and FMIC. The FMIC itself leaves a lot to be desired for and want to switch to a Nisei or AMS setup as I know its proven.

3) Ignition amplifier - connected to engine harness. Engine will not start if its unplugged. I am not sure what it does and if its proven, per say!

Any advice appreciated!
Reply
Old Aug 30, 2007 | 08:11 AM
  #2  
AL Beans's Avatar
Evolving Member
iTrader: (2)
 
Joined: Feb 2007
Posts: 200
Likes: 0
From: union
ignition amp is a proven thing i am trying to find a tech article i read about it ..............it is on par with an hks dli system but i would def choose the hks part over the xs piece
Reply




All times are GMT -7. The time now is 07:41 AM.