Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Edge racing resonated Test pipe

Thread Tools
 
Search this Thread
 
Old Nov 15, 2007 | 08:15 PM
  #1  
destro92179's Avatar
Thread Starter
Newbie
iTrader: (4)
 
Joined: Aug 2007
Posts: 92
Likes: 0
From: SA
Edge racing resonated Test pipe

I was very interested in pickin this item up...any thoughts??? Good, Bad ???
Reply
Old Nov 16, 2007 | 04:15 AM
  #2  
Emperor 4g63's Avatar
Evolving Member
 
Joined: Jan 2006
Posts: 158
Likes: 0
From: New Jersey
I bought there o2 housing and it was top notch
Reply
Old Nov 16, 2007 | 04:41 AM
  #3  
saiyanzzrage's Avatar
Evolved Member
iTrader: (11)
 
Joined: Jan 2006
Posts: 1,444
Likes: 0
From: NYC
what the heck is a edge racing?
Reply
Old Nov 16, 2007 | 07:53 AM
  #4  
BenJ's Avatar
Evolved Member
iTrader: (21)
 
Joined: Jul 2007
Posts: 1,259
Likes: 0
From: SoCal
I had an exhaust from them back in my E36 M3 days. I didn't know that they served any other car other than the BMW up until now.
Reply
Old Nov 16, 2007 | 08:07 AM
  #5  
dan628's Avatar
Evolved Member
iTrader: (5)
 
Joined: Aug 2005
Posts: 802
Likes: 0
From: Sycamore, IL
Would a resonated test pipe quiet down the exhaust at all which would be noticed over a regular test pipe without sacraficing the power the regular test pipe gives?
Reply
Old Nov 16, 2007 | 08:11 AM
  #6  
McDougal's Avatar
Evolved Member
iTrader: (6)
 
Joined: Nov 2005
Posts: 550
Likes: 0
From: Portland, OR
Yes it would. The longer the resonator the better. If you are not worried about emissions and want to quiet the car down you might want to get a longer resonator welded in further back in the exhaust where there is more room. The test pipe section is pretty short.

Kind of off topic, but I put a HFC in my TBE last weekend and it made a huge difference.
Reply
Old Nov 16, 2007 | 09:50 AM
  #7  
destro92179's Avatar
Thread Starter
Newbie
iTrader: (4)
 
Joined: Aug 2007
Posts: 92
Likes: 0
From: SA
the design looks the exact same as Megan's resonated test pipe...exact same
Reply




All times are GMT -7. The time now is 12:36 PM.