Anyone running the Apexi AVC-R
Thread Starter
Evolving Member
Joined: Jun 2003
Posts: 162
Likes: 0
From: Portland, OR soon to be Austin, TX
Anyone running the Apexi AVC-R
I bought an Apexi'i AVC-R boost controller and I am wondering if anyone out there with an Evo 8 has one yet and what settings they have found optimal for the Evo?
Anyone care to share?
Thanks
Chris
Anyone care to share?
Thanks
Chris
Evolving Member
Joined: May 2003
Posts: 300
Likes: 0
From: Arizona
boost 1.4
duty 65%
feedback speed 1 for all gears
start duty 1st +6 2nd +3 3rd 0 4th -4 5th -8
I also have a "race setting" set at 1.5 with a duty of 80%. After you set these initial duty cycles the controller will begin to learn on its own what duty it needs for a particular rpm to achieve the target boost.
duty 65%
feedback speed 1 for all gears
start duty 1st +6 2nd +3 3rd 0 4th -4 5th -8
I also have a "race setting" set at 1.5 with a duty of 80%. After you set these initial duty cycles the controller will begin to learn on its own what duty it needs for a particular rpm to achieve the target boost.