Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

any buschur 2.3Ls in the house?

Thread Tools
 
Search this Thread
 
Old Feb 10, 2008 | 02:18 AM
  #91  
dxbevo9's Avatar
Thread Starter
Evolved Member
iTrader: (6)
 
Joined: Jan 2005
Posts: 2,723
Likes: 0
From: Dubai, U.A.E.
Originally Posted by EvoRecordSetter
make sure u update when its all together, post up some video's / timeslips / dyno charts. the more info the cooler you are.
anyone who drives an evo is cool..hahahha

Reply
Old Feb 10, 2008 | 10:53 AM
  #92  
wartownracer's Avatar
Evolving Member
iTrader: (3)
 
Joined: Jan 2008
Posts: 281
Likes: 0
From: warner robins georgia
how much sooner does the HTA 35r spool up then then regular 35r?
Reply
Old Feb 10, 2008 | 12:20 PM
  #93  
LilRico's Avatar
Evolved Member
iTrader: (21)
 
Joined: Feb 2007
Posts: 1,848
Likes: 0
From: Cut throat, Orlando
Originally Posted by dxbevo9
lilrico...souds sweet...
how did the tuner find the engine...did it seem prone to "fake" knock? also what ecu are you tuning on?

thanks and good luck
Knock The car is very hard to make knock but it's possible. Even getting it to spike 28 PSI there was no knock on stock turbo, pump gas. But since I'm on the stock turbo it couldn't make any more power!!! So with a HTA35R I'm more then sure you can tune it for 30 PSI on pump gas and still get over 400+ AWHP for a daily driver. I'm using stock ECU still and as far as tuning, JestR was excited and had fun tuning it because this motor comes alive and is very, very, VERY efficient!!!!

Originally Posted by wartownracer
how much sooner does the HTA 35r spool up then then regular 35r?
About 500RPM's depending on set-up. There's a lot of that info here on this forum, so search for it and it will help you out even more
Reply
Old Feb 11, 2008 | 05:33 AM
  #94  
Sharkbite2000's Avatar
Evolved Member
iTrader: (21)
 
Joined: Dec 2005
Posts: 4,898
Likes: 14
From: Eugene, Oregon
Can't wait to see what a HTA37R does that might be my next move
Reply
Old Feb 11, 2008 | 06:26 AM
  #95  
LilRico's Avatar
Evolved Member
iTrader: (21)
 
Joined: Feb 2007
Posts: 1,848
Likes: 0
From: Cut throat, Orlando
Originally Posted by Sharkbite2000
Can't wait to see what a HTA37R does that might be my next move
Me and you both.... If it has a really close spool to a 35R, then that will be my route, but we'll have to wait and see when Bushcur does a test on it. Should be done pretty soon... I've been waiting on this turbo for a while now...
Reply
Old Feb 11, 2008 | 10:14 PM
  #96  
EvoRecordSetter's Avatar
Evolved Member
 
Joined: Feb 2006
Posts: 1,123
Likes: 0
From: Seattle
im excited for the HTA37R also anyone know when it will have posted results? if anyone needs a driver to set a track et let me know
Reply
Old Feb 17, 2008 | 03:35 AM
  #97  
Boost Oman's Avatar
Newbie
 
Joined: Feb 2007
Posts: 56
Likes: 0
From: Oman
dbxevo ,
so have u revieced ur parts yet?
Reply
Old Feb 27, 2008 | 03:41 AM
  #98  
dxbevo9's Avatar
Thread Starter
Evolved Member
iTrader: (6)
 
Joined: Jan 2005
Posts: 2,723
Likes: 0
From: Dubai, U.A.E.
yeah i received so many of my parts...you can check out in the show n shine forum a topic called "so many horses on my floor"

did you receive anything?
Reply
Old Feb 27, 2008 | 05:33 AM
  #99  
LilRico's Avatar
Evolved Member
iTrader: (21)
 
Joined: Feb 2007
Posts: 1,848
Likes: 0
From: Cut throat, Orlando
Originally Posted by dxbevo9
"so many horses on my floor"
Great title!
Reply




All times are GMT -7. The time now is 10:06 PM.